It is currently November 23rd, 2024, 5:28 am

OUR ONTARIO DRAG PEOPLE LIKED THE 3 CYLINDER CLASS AT JASPER

View active topics

All times are UTC - 5 hours [ DST ]


Post new topic Reply to topic  [ 28 posts ]  Go to page Previous  1, 2, 3
Author Message
 PostPosted: January 8th, 2019, 8:57 pm   
Member

Joined: March 29th, 2013, 10:08 am
Posts: 96
Hounddog wrote:
Have our 2018 3 cylinder class drag rules been approved?
I noticed the 2018 American rules are now posted.
thanks


Got a link for the rules?


Top
 Profile Send private message  
 PostPosted: January 8th, 2019, 11:03 pm   
Team Member
User avatar

Joined: April 3rd, 2012, 1:52 pm
Posts: 3165
2018
Class Rules
3-Cylinder Outlaw
Entry Level racing for Lake Boats at a minimal cost
1) Hulls will be limited to Flat, V Bottom and Tunnel. No Hydro or Outrigger style
hulls
2) Boat must meet all DSRA safety regulations. Battery and fuel tank secured
(bolted, strapped) Lifejacket with leg straps (lifeline or equv. ect.) Working fire
extinguisher within reach of driver. Driver must be seat and steering wheels only.
No tillers. Hulls must have means of strapping for weighing.
3) Any Fuel- No Alcohol, No Additives, No Nitro Methane.
4) Timing computers, controllers allowed
5) No power adders. (NOS, turbo, blower, etc.…)
6) 3 Cylinder engines only and limited to 86ci. Must have been production fishing
outboard before modifications. (60SST OMC allowed) Lower unit must be of the
shift able type and may have low water pickup attached. Mismatching of brands
between powerhead and lower unit allowed. Any midsection and trim allowed.

3-Cylinder Outlaw
All weights subject to review at any time
Weights will be determined by Cube Inch
➢ 42ci-44ci 700lbs
➢ 45ci-62ci 800lbs
➢ 63ci-86ci 880lbs


Top
 Profile Send private message  
 PostPosted: January 9th, 2019, 7:50 am   
Team Member
User avatar

Joined: October 2nd, 2012, 7:53 am
Posts: 947
Location: Peterborough
These are basically the rules we are working off, but as Craig said we haven't finalized our class rules yet. Stay tuned!

_________________
1988 Canadian Edition Vision sold
1990 Hydrostream Virage Stage 3 Turbo


Top
 Profile Send private message  
 PostPosted: January 9th, 2019, 11:06 am   
Team Member
User avatar

Joined: April 3rd, 2012, 1:52 pm
Posts: 3165
I like the 42 to 44 cubic inch class
There are many successful MODS for the 40-50 hp Yamahas
Here is a thread that covers the YAMAHA mods.
http://www.boatracingfacts.com/forums/s ... ded-Yamaha

Don't forget you can use parts from other models and/or other engine makes in your build.
You can be very creative in your build.
http://www.boatracingfacts.com/forums/a ... 1162497069

I also have one of these hulls to go with the motor.
https://static.wixstatic.com/media/faa9 ... 2f~mv2.jpg


Top
 Profile Send private message  
 PostPosted: December 23rd, 2019, 1:50 pm   
Drag Racing Sponsor

Joined: October 30th, 2012, 12:14 am
Posts: 698
Location: Palmerston
Out of curiosity, did the club settle on the above rules for 3 cylinder drag?

_________________
Image
13' Rapid Craft 15" OMC 56
13' Critchfield 15" OMC 56
19' Laser 380 Ray (Future Project)


Top
 Profile Send private message  
 PostPosted: December 23rd, 2019, 2:01 pm   
Team Member
User avatar

Joined: October 2nd, 2012, 7:53 am
Posts: 947
Location: Peterborough
Hevi Kevi wrote:
Out of curiosity, did the club settle on the above rules for 3 cylinder drag?


From the OPBRA rule book, 2019

TRIPLES CLASS
RULESRULE 10 • TRIPLES CLASS
1. Age requirement 16 minimum
2. Follow General/Competition Regulations - Drag classes and Safety
3. Approved hulls are Flat, V bottom and Tunnel. Hydro or Outrigger hulls not
permitted
4. Post-race minimum weight, based on cubic inch:
a) 42 to 44.9 c.i. 780 lbs
b) 45 to 62.9 c.i. 800 lbs
c) 63 to 86 c.i. 880 lbs
(includes boat/motor/propeller, running gear, driver, helmet, life jacket, etc.)
5. Motors:
a. 3-cylinder engine only to maximum 86 cubic inch. (Must have been a
production available engine prior to modifications, 60SST permitted)
b. No tiller style steering
c. No power adders (NOS, Turbo, Superchargers, etc..)
d. Ignition timing computers, controllers or like, permitted
e. Gearcase must be shiftable from Drivers seat.
f. Low water pickup, nose cone permitted
g. Any midsection and trim permitted
h. 24V systems permitted
i. Trim computers mandatory with 24V trim. (Must be outboard purpose-
built approved by Safety/Tech with 12V control circuit.)
j. Any Gasoline permitted (No Alcohol, Nitromethane, etc.)

_________________
1988 Canadian Edition Vision sold
1990 Hydrostream Virage Stage 3 Turbo


Top
 Profile Send private message  
 PostPosted: December 23rd, 2019, 3:35 pm   
Drag Racing Sponsor

Joined: October 30th, 2012, 12:14 am
Posts: 698
Location: Palmerston
idvette wrote:
Hevi Kevi wrote:
Out of curiosity, did the club settle on the above rules for 3 cylinder drag?


From the OPBRA rule book, 2019

TRIPLES CLASS
RULESRULE 10 • TRIPLES CLASS
1. Age requirement 16 minimum
2. Follow General/Competition Regulations - Drag classes and Safety
3. Approved hulls are Flat, V bottom and Tunnel. Hydro or Outrigger hulls not
permitted
4. Post-race minimum weight, based on cubic inch:
a) 42 to 44.9 c.i. 780 lbs
b) 45 to 62.9 c.i. 800 lbs
c) 63 to 86 c.i. 880 lbs
(includes boat/motor/propeller, running gear, driver, helmet, life jacket, etc.)
5. Motors:
a. 3-cylinder engine only to maximum 86 cubic inch. (Must have been a
production available engine prior to modifications, 60SST permitted)
b. No tiller style steering
c. No power adders (NOS, Turbo, Superchargers, etc..)
d. Ignition timing computers, controllers or like, permitted
e. Gearcase must be shiftable from Drivers seat.
f. Low water pickup, nose cone permitted
g. Any midsection and trim permitted
h. 24V systems permitted
i. Trim computers mandatory with 24V trim. (Must be outboard purpose-
built approved by Safety/Tech with 12V control circuit.)
j. Any Gasoline permitted (No Alcohol, Nitromethane, etc.)


Thanks

_________________
Image
13' Rapid Craft 15" OMC 56
13' Critchfield 15" OMC 56
19' Laser 380 Ray (Future Project)


Top
 Profile Send private message  
 PostPosted: December 23rd, 2019, 4:39 pm   
Team Member
User avatar

Joined: April 3rd, 2012, 1:52 pm
Posts: 3165
Hevi Kevi wrote:
Out of curiosity, did the club settle on the above rules for 3 cylinder drag?


YES!
http://opbra.ca/wp-content/uploads/2019 ... Feb-20.pdf

• TRIPLES CLASS
1. Age requirement 16 minimum
2. Follow General/Competition Regulations - Drag classes and Safety
3. Approved hulls are Flat, V bottom and Tunnel. Hydro or Outrigger hulls not
permitted
4. Post-race minimum weight, based on cubic inch:
a) 42 to 44.9 c.i. 780 lbs
b) 45 to 62.9 c.i. 800 lbs
c) 63 to 86 c.i. 880 lbs
(includes boat/motor/propeller, running gear, driver, helmet, life jacket, etc.)
5. Motors:
a. 3-cylinder engine only to maximum 86 cubic inch. (Must have been a
production available engine prior to modifications, 60SST permitted)
b. No tiller style steering
c. No power adders (NOS, Turbo, Superchargers, etc..)
d. Ignition timing computers, controllers or like, permitted
e. Gearcase must be shiftable from Drivers seat.
f. Low water pickup, nose cone permitted
g. Any midsection and trim permitted
h. 24V systems permitted
i. Trim computers mandatory with 24V trim. (Must be outboard purposebuilt approved by Safety/Tech with 12V control circuit.)
j. Any Gasoline permitted (No Alcohol, Nitromethane, etc.)


Top
 Profile Send private message  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 28 posts ]  Go to page Previous  1, 2, 3

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 10 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  


Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Style originally created by Volize © 2003 • Redesigned SkyLine by MartectX © 2008 - 2010