Hevi Kevi wrote:
Out of curiosity, did the club settle on the above rules for 3 cylinder drag?
From the OPBRA rule book, 2019
TRIPLES CLASS
RULESRULE 10 • TRIPLES CLASS
1. Age requirement 16 minimum
2. Follow General/Competition Regulations - Drag classes and Safety
3. Approved hulls are Flat, V bottom and Tunnel. Hydro or Outrigger hulls not
permitted
4. Post-race minimum weight, based on cubic inch:
a) 42 to 44.9 c.i. 780 lbs
b) 45 to 62.9 c.i. 800 lbs
c) 63 to 86 c.i. 880 lbs
(includes boat/motor/propeller, running gear, driver, helmet, life jacket, etc.)
5. Motors:
a. 3-cylinder engine only to maximum 86 cubic inch. (Must have been a
production available engine prior to modifications, 60SST permitted)
b. No tiller style steering
c. No power adders (NOS, Turbo, Superchargers, etc..)
d. Ignition timing computers, controllers or like, permitted
e. Gearcase must be shiftable from Drivers seat.
f. Low water pickup, nose cone permitted
g. Any midsection and trim permitted
h. 24V systems permitted
i. Trim computers mandatory with 24V trim. (Must be outboard purpose-
built approved by Safety/Tech with 12V control circuit.)
j. Any Gasoline permitted (No Alcohol, Nitromethane, etc.)