It is currently November 21st, 2024, 11:40 am

LOOKING FOR ONE OF THESE 11 FOOT TUNNELS....

View active topics

All times are UTC - 5 hours [ DST ]


Post new topic Reply to topic  [ 36 posts ]  Go to page Previous  1, 2, 3, 4
Author Message
 PostPosted: December 24th, 2017, 6:03 am   
Team Member
User avatar

Joined: April 3rd, 2012, 1:52 pm
Posts: 3162
We can learn from these racers. This class was a hydro class. The need for safety cells resulted in a switch to a tunnel hull. The tunnel celled boat was much heavier compared to the hydro and they thought non competitive to the hydro. This is a video of the early celled tunnels in the same race as the hydro's. The newest celled tunnels have a much lower cell. There are different classes within the race.
https://www.youtube.com/watch?v=JJTuMNsowiI


Top
 Profile Send private message  
 PostPosted: December 24th, 2017, 5:40 pm   
Member

Joined: May 28th, 2013, 10:16 pm
Posts: 21
The safety cell came about because of the class speed. Safety cells are required in the 100 mph classes I believe. The pro guys could comment on that more accurately. 750 and 1100 cc classes.


Top
 Profile Send private message  
 PostPosted: January 5th, 2018, 3:57 pm   
Team Member
User avatar

Joined: April 3rd, 2012, 1:52 pm
Posts: 3162
harold8 wrote:
The safety cell came about because of the class speed. Safety cells are required in the 100 mph classes I believe. The pro guys could comment on that more accurately. 750 and 1100 cc classes.


You can see tunnel hulls with cells in this race. Some T's in the video as well.
https://www.youtube.com/watch?v=fVT-NqXgD4k


Top
 Profile Send private message  
 PostPosted: January 8th, 2018, 11:40 pm   
HPBC PRESIDENT
User avatar

Joined: March 31st, 2012, 5:53 pm
Posts: 3548
Location: Lapping lil charger
I notice they are running studs on the power headband they look large. I'd like to see how they work the adaptor plate and steering bars with that setup.

_________________
08 SRV w/3.1 Hydro-tec Phase lll

I've got enough torque to tear a hole....in time...


Top
 Profile Send private message  
 PostPosted: April 6th, 2018, 1:11 pm   
Team Member
User avatar

Joined: April 3rd, 2012, 1:52 pm
Posts: 3162
Now this is IMPRESSIVE.......30 HP Yamaha......81 MPH!
http://www.boatracingfacts.com/forums/a ... 1522972475

http://www.boatracingfacts.com/forums/a ... 1522972536


Top
 Profile Send private message  
 PostPosted: April 20th, 2018, 4:06 pm   
Team Member
User avatar

Joined: April 3rd, 2012, 1:52 pm
Posts: 3162
vwfreak wrote:
How about the 10ft version? I'd sure like to be able to race one these hulls after owning the first one almost 20 years ago, but I sure don't want to be doing it on my knees.
Rick (Dok) has a Yamaha 30hp that he has offered to let me use and test with next spring. I think that will be a good combo. I built this hull for a Mariner Magnum 40hp, but will try the 30 first. What engine sizes are you thinking of using? 25, 30, 40+?


THIS CLASS WOULD BE OF INTEREST TO YOU PEOPLE WITH THE SMALL TUNNELS AND V HULLS

http://www.nzpba.com/clubmans.htm

NOTE: Class in ANY type hull.....no minimum length.....just minimum weight....simple rules.
Clubmans Class is open to all those over 15 years of age.
Engines: 25hp Stock Outboard or 30hp 2cylinder Stock Outboard
Hull design is free Ski Boat, Flattie, Skiff, Hydroplane, Tunnel Boat what ever hull you think works best with your Engine Package. All Boats must be fitted with a foot or Deadmans hand throttle. No Tiller Steering is Permitted.
Competitors must wear Safety Gear Helmets, Lifejacket's in accordance with the NZPBA Rule Book.
Midsection: Must be Standard with ID tag on.
Gearbox: Standard IE: Forward, Reverse and Neutral. Nose Cones and water pickup modifications are permitted
Propellor: Open.
Fuel: Pump Gas Only.
Numbers: To be on a Vertical Plane Behind the Rear of the Driver.
Life Jackets: Collered life jackets with crutch straps to NZ safety standards.
Weight: Minimum weight of Boat, Driver, Engine and Fuel to be 180kg. APPROXIMATELY 400 LBS.
Steering Cable: Wire galvanised or Stainless to be replaced every 2 years with proof of purchase for RWOF.4mm minimum thickness 7x19 woven strand or similar specs. Spectra allowed.


NZPBA falls under NZ Boating federation which falls under UIM.....same as CBF here in Canada.
So you could have this class here.

They also have a Junior [12 year old class] as well.


Top
 Profile Send private message  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 36 posts ]  Go to page Previous  1, 2, 3, 4

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 34 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron


Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Style originally created by Volize © 2003 • Redesigned SkyLine by MartectX © 2008 - 2010