It is currently November 22nd, 2024, 12:59 pm

My GOOD old days..the 1960's CHECKMATES

View active topics

All times are UTC - 5 hours [ DST ]


Post new topic Reply to topic  [ 17 posts ]  Go to page 1, 2  Next
Author Message
 PostPosted: December 9th, 2012, 12:18 am   
Team Member
User avatar

Joined: April 3rd, 2012, 1:52 pm
Posts: 3163
Here is a post showing the early model Checkmates. I got my first one in 1966. It was a 16 footer. Ran it initially with a 125 hp short and then with a 1250BP. In 1968 Checkmate built me a super light 13 foot which I raced with a Mercury 50 hp.
Notice NO PAD! Their hulls were very will built. The 19 with a V6 on it is still a very fast boat. The 14 was not very good performance wise. The later 15 footer up to 1973 was a very fast boat.

http://www.screamandfly.com/showthread. ... -brochures


Top
 Profile Send private message  
 PostPosted: December 9th, 2012, 3:42 pm   
Member
User avatar

Joined: August 15th, 2012, 3:26 pm
Posts: 228
Yeah I remember John Beer had a very fast 19 :) Any idea where that boat is now Don?

_________________
AnthonySS


Top
 Profile Send private message WWW  
 PostPosted: December 9th, 2012, 6:13 pm   
Team Member
User avatar

Joined: April 3rd, 2012, 1:52 pm
Posts: 3163
AnthonySS wrote:
Yeah I remember John Beer had a very fast 19 :) Any idea where that boat is now Don?


Your talking about the red one. That boat was originally Jerry's. When John died I believe that boat and a lot of the equipment from the Prop Shop went out west with the fellow that came in to finish off the props that were in process.


Top
 Profile Send private message  
 PostPosted: December 9th, 2012, 7:25 pm   
Member
User avatar

Joined: August 15th, 2012, 3:26 pm
Posts: 228
I Thought it was Black?

_________________
AnthonySS


Top
 Profile Send private message WWW  
 PostPosted: December 9th, 2012, 11:12 pm   
Team Member
User avatar

Joined: April 3rd, 2012, 1:52 pm
Posts: 3163
AnthonySS wrote:
I Thought it was Black?


Red with the black fog


Top
 Profile Send private message  
 PostPosted: December 11th, 2012, 8:33 pm   
Member

Joined: November 20th, 2012, 6:46 pm
Posts: 16
Location: Ontario,Canada
Hounddog wrote:
Here is a post showing the early model Checkmates. I got my first one in 1966. It was a 16 footer. Ran it initially with a 125 hp short and then with a 1250BP. In 1968 Checkmate built me a super light 13 foot which I raced with a Mercury 50 hp.
Notice NO PAD! Their hulls were very will built. The 19 with a V6 on it is still a very fast boat. The 14 was not very good performance wise. The later 15 footer up to 1973 was a very fast boat.

http://www.screamandfly.com/showthread. ... -brochures


So the old MX-15 I picked up this fall has potential.It does have a pad.


Top
 Profile Send private message  
 PostPosted: December 11th, 2012, 9:13 pm   
Team Member
User avatar

Joined: April 3rd, 2012, 1:52 pm
Posts: 3163
CVX20 wrote:
So the old MX-15 I picked up this fall has potential.It does have a pad.


You bet! If it is the early model MX-15 up to 1973, that boat is great! It is much narrower that the later model. Checkmate had a fire in 1973 and those molds were lost. I had a red one on order at the time and my boat was never built. They had 3 boats in stock, none of them race hulls and all the same colour. PINK!! with a cream interior. I took one of them. Since it was a normally boat I switched from a short shaft 150 to a long. I totally lucked out on the long shaft and got one of the special powerheads not a J block but the real rare one and they only had them on a few long shafts.. I didn't know it at the time until I ran the motor. I had a lot of experience with BP race motors on Checkmates and this one was far nicer to drive than any of them. No flat spots, super smooth all the way to 7300 rpm. Which for a 99.9 cu. inch inline was very good rpm for those days. This hull doesn't fly or float. It darts on you. With big power you need to be sharp all the time.


Top
 Profile Send private message  
 PostPosted: December 11th, 2012, 9:50 pm   
Member

Joined: November 20th, 2012, 6:46 pm
Posts: 16
Location: Ontario,Canada
Hounddog wrote:
CVX20 wrote:
So the old MX-15 I picked up this fall has potential.It does have a pad.


You bet! If it is the early model MX-15 up to 1973, that boat is great! It is much narrower that the later model. Checkmate had a fire in 1973 and those molds were lost. I had a red one on order at the time and my boat was never built. They had 3 boats in stock, none of them race hulls and all the same colour. PINK!! with a cream interior. I took one of them. Since it was a normally boat I switched from a short shaft 150 to a long. I totally lucked out on the long shaft and got one of the special powerheads not a J block but the real rare one and they only had them on a few long shafts.. I didn't know it at the time until I ran the motor. I had a lot of experience with BP race motors on Checkmates and this one was far nicer to drive than any of them. No flat spots, super smooth all the way to 7300 rpm. Which for a 99.9 cu. inch inline was very good rpm for those days. This hull doesn't fly or float. It darts on you. With big power you need to be sharp all the time.

It's a 72.I got an 73 1500 that is not enough power for my other boat that I was thinking about hanging on it.Nothing special,just an old motor that runs pretty decent.I got it from a guy I work with and he had a 115 Rude on it.Gotta do a bit of work to the boat first,but it should be fun.


Top
 Profile Send private message  
 PostPosted: December 11th, 2012, 10:00 pm   
Team Member
User avatar

Joined: April 1st, 2012, 12:29 am
Posts: 1445
CVX20 wrote:
Hounddog wrote:
CVX20 wrote:
So the old MX-15 I picked up this fall has potential.It does have a pad.


You bet! If it is the early model MX-15 up to 1973, that boat is great! It is much narrower that the later model. Checkmate had a fire in 1973 and those molds were lost. I had a red one on order at the time and my boat was never built. They had 3 boats in stock, none of them race hulls and all the same colour. PINK!! with a cream interior. I took one of them. Since it was a normally boat I switched from a short shaft 150 to a long. I totally lucked out on the long shaft and got one of the special powerheads not a J block but the real rare one and they only had them on a few long shafts.. I didn't know it at the time until I ran the motor. I had a lot of experience with BP race motors on Checkmates and this one was far nicer to drive than any of them. No flat spots, super smooth all the way to 7300 rpm. Which for a 99.9 cu. inch inline was very good rpm for those days. This hull doesn't fly or float. It darts on you. With big power you need to be sharp all the time.

It's a 72.I got an 73 1500 that is not enough power for my other boat that I was thinking about hanging on it.Nothing special,just an old motor that runs pretty decent.I got it from a guy I work with and he had a 115 Rude on it.Gotta do a bit of work to the boat first,but it should be fun.


We want pics! :mrgreen:

_________________
Bullet 20 cc Super Comp
Delta with a slow 56
Jcraft with a ProV 150


Top
 Profile Send private message  
 PostPosted: December 11th, 2012, 11:10 pm   
Member

Joined: November 20th, 2012, 6:46 pm
Posts: 16
Location: Ontario,Canada
Just the way it was when it got dropped off.No place to do anything to it over the winter either.
Image


Top
 Profile Send private message  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 17 posts ]  Go to page 1, 2  Next

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  


Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Style originally created by Volize © 2003 • Redesigned SkyLine by MartectX © 2008 - 2010