It is currently November 26th, 2024, 2:34 am

Voodoo resurrection

View active topics

All times are UTC - 5 hours [ DST ]


Post new topic Reply to topic  [ 81 posts ]  Go to page Previous  1 ... 4, 5, 6, 7, 8, 9  Next
Author Message
 PostPosted: May 6th, 2019, 11:03 am   
Team Member
User avatar

Joined: April 1st, 2012, 12:29 am
Posts: 1445
Awesome Job!

_________________
Bullet 20 cc Super Comp
Delta with a slow 56
Jcraft with a ProV 150


Top
 Profile Send private message  
 PostPosted: May 6th, 2019, 11:34 am   
Member

Joined: April 21st, 2014, 9:59 am
Posts: 185
Man that looks good! Makes we want to buy it back for a 3rd time!

Great work! Now's the fun part!


Top
 Profile Send private message  
 PostPosted: May 7th, 2019, 7:07 am   
Team Member
User avatar

Joined: April 2nd, 2012, 7:35 pm
Posts: 406
Location: Barrie, On
Nice job Mark! Keep us updated with the test results.

_________________
Triad V21 - 300xs
19' J-craft - 175 opti
18' Pontoon - 115 opti
12' tinny - 9.9 merc


Top
 Profile Send private message  
 PostPosted: May 7th, 2019, 7:48 am   
Team Member
User avatar

Joined: April 3rd, 2012, 1:52 pm
Posts: 3173
This power trim system would be a nice addition.....not a bad asking price at $450.00.
These are very good units.
You could use it in place of the current set back.
Also makes it easy and less costly should you decide to run a different motor.
https://www.kijiji.ca/v-other-boat-wate ... nFlag=true

Here is one of the original small Mercury choppers.
Way over priced!
But, you can use them for the 30, 50 and 70 [small case] by changing the hub.
https://www.kijiji.ca/v-powerboat-motor ... nFlag=true

http://www.boatracingfacts.com/forums/a ... 1557071139


Top
 Profile Send private message  
 PostPosted: May 7th, 2019, 3:26 pm   
Member
User avatar

Joined: June 5th, 2015, 8:56 am
Posts: 533
This is good stuff. Very cool.
Most people know that yellow is the fastest colour, so good choice there.

_________________
Critchfield T850 OMC 56ci
Delta T750 Yamaha 55
1989 Voodoo Yamaha 70
1980 Thundercraft v142 Restored


Top
 Profile Send private message  
 PostPosted: May 7th, 2019, 3:52 pm   
Member

Joined: August 22nd, 2013, 4:13 pm
Posts: 273
:lol:Holy Crap, then I'm painting my T-750 Critch yellow. If I paint the trailer yellow, will I get to races faster???


Top
 Profile Send private message  
 PostPosted: May 7th, 2019, 8:09 pm   
Member

Joined: October 26th, 2018, 9:23 am
Posts: 120
Location: Severn Bridge
[quote="Hounddog"]This power trim system would be a nice addition.....not a bad asking price at $450.00.
These are very good units.
You could use it in place of the current set back.
Also makes it easy and less costly should you decide to run a different motor.
https://www.kijiji.ca/v-other-boat-wate ... nFlag=true

Here is one of the original small Mercury choppers.
Way over priced!
But, you can use them for the 30, 50 and 70 [small case] by changing the hub.
https://www.kijiji.ca/v-powerboat-motor ... nFlag=true

http://www.boatracingfacts.com/forums/a ... 1557071139[/quote

Thanks Don I'm going to look into that. That prop is an 18 pitch. Does running a chopper allow more pitch? Stock was 12 I believe.

Thanks for the kind remarks guys were pretty stoked to get it wet and let Zach get a handle on driving it. It's been really fun!

_________________
2 x OSCA Modified street champion
2 x OSCA Factory street champion
Current KOTS motorcycle record holder 7.83 @ 182 mph
2019 OPBRA Formula Champion


Top
 Profile Send private message  
 PostPosted: May 8th, 2019, 9:34 am   
Team Member
User avatar

Joined: April 3rd, 2012, 1:52 pm
Posts: 3173
Thanks Don That prop is an 18 pitch. Does running a chopper allow more pitch? Stock was 12 I believe.

Mark, the stock 12 pitch is designed for the average production boat and multiple passengers.
Mercury designed the 18 chopper for light weight performance single passenger boats.
There is a difference between the original 18 and the chopper 2...the second version.
This link gives the info on the chopper 2 prop....Ron Hill's props are a bit different to the Mercury.
https://www.mertenmarine.com/Chopper-II ... r-43592A61

With a stock prop you will rev over 6000 and run 40 mph ish.
The spline is different for the 30 yamaha compared to the 25 mercury and the spline is different for the 50 Yamaha.
The hubs can be switched and the rubber hubs fit.
I have never had a chopper 2 prop.....only the original.
On a "light" VooDoo with a 30 hp Yamaha they run 45 to 46 mph at approximate 5800 rpm.....very slow to get on plane.
Same VooDoo with a 50 hp Yamaha same prop ran 54 mph at 6400 rpm.
AS NOTED IN THE LINK:
You can run these props high on the transom and the prop works well with a hull that needs bow lift.....MOST DELTAS AND VOODOO'S WITH 50 HP AND SMALLER MOTORS NEED BOW LIFT. ONCE YOU HAVE A DELTA OR VOODOO RUNNING OVER 60 MPH THE "SPEED" GIVES THE BOW LIFT. RUNNING OVER 70 MPH THEY HAVE "TOO MUCH" BOW LIFT AND ARE DANGEROUS!!


Top
 Profile Send private message  
 PostPosted: May 8th, 2019, 12:27 pm   
Member

Joined: October 26th, 2018, 9:23 am
Posts: 120
Location: Severn Bridge
Hounddog wrote:
Thanks Don That prop is an 18 pitch. Does running a chopper allow more pitch? Stock was 12 I believe.

Mark, the stock 12 pitch is designed for the average production boat and multiple passengers.
Mercury designed the 18 chopper for light weight performance single passenger boats.
There is a difference between the original 18 and the chopper 2...the second version.
This link gives the info on the chopper 2 prop....Ron Hill's props are a bit different to the Mercury.
https://www.mertenmarine.com/Chopper-II ... r-43592A61

With a stock prop you will rev over 6000 and run 40 mph ish.
The spline is different for the 30 yamaha compared to the 25 mercury and the spline is different for the 50 Yamaha.
The hubs can be switched and the rubber hubs fit.
I have never had a chopper 2 prop.....only the original.
On a "light" VooDoo with a 30 hp Yamaha they run 45 to 46 mph at approximate 5800 rpm.....very slow to get on plane.
Same VooDoo with a 50 hp Yamaha same prop ran 54 mph at 6400 rpm.
AS NOTED IN THE LINK:
You can run these props high on the transom and the prop works well with a hull that needs bow lift.....MOST DELTAS AND VOODOO'S WITH 50 HP AND SMALLER MOTORS NEED BOW LIFT. ONCE YOU HAVE A DELTA OR VOODOO RUNNING OVER 60 MPH THE "SPEED" GIVES THE BOW LIFT. RUNNING OVER 70 MPH THEY HAVE "TOO MUCH" BOW LIFT AND ARE DANGEROUS!!


Thanks Don thats great info. Cant wait to get playing with this stuff!

Mark

_________________
2 x OSCA Modified street champion
2 x OSCA Factory street champion
Current KOTS motorcycle record holder 7.83 @ 182 mph
2019 OPBRA Formula Champion


Top
 Profile Send private message  
 PostPosted: May 9th, 2019, 7:13 pm   
Member
User avatar

Joined: October 19th, 2017, 8:39 pm
Posts: 133
Location: Belmont Lake
Hi Mark! I have a 15" 4 blade trophy that I ran on my VooDoo with a 90s 60hp merc. It worked really good all around. You're welcome to try it and if you like it I'll sell it real cheap....putting a 70 Johnson back on the boat and sold the motor so I don't need the prop anymore. Craig

_________________
1969 Cobra Sidewinder 200 Merc
1984 Critchfield SST 60 EVINRUDE
1990 Voodoo 70 JOHNSON
2019 Rossitter Critchfield SST60 EVINRUDE


Top
 Profile Send private message  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 81 posts ]  Go to page Previous  1 ... 4, 5, 6, 7, 8, 9  Next

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  


Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Style originally created by Volize © 2003 • Redesigned SkyLine by MartectX © 2008 - 2010