It is currently November 10th, 2024, 3:47 pm

Fast Craft 14 foot river racers...interesting hull..T Boat??

View active topics

All times are UTC - 5 hours [ DST ]


Post new topic Reply to topic  [ 27 posts ]  Go to page Previous  1, 2, 3  Next
Author Message
 PostPosted: March 7th, 2016, 11:44 am   
Drag Racing Sponsor

Joined: October 30th, 2012, 12:14 am
Posts: 698
Location: Palmerston
BoomerMuskoka wrote:
phillnjack wrote:
Now go and watch the videos at the right speed !!!!!
nearly all of them down the southern states are speeding up their videos.

none of them hit anywhere near what they try and claim. the only ones that go quick use NOS.


how the fuck would you know what people in the USA run?.. https://youtu.be/w8or4OuQEAU?t=32s


C'mon Boomer! It's phillnjack, Forum Legend. He just knows...

_________________
Image
13' Rapid Craft 15" OMC 56
13' Critchfield 15" OMC 56
19' Laser 380 Ray (Future Project)


Top
 Profile Send private message  
 PostPosted: March 8th, 2016, 1:13 pm   
Member
User avatar

Joined: September 15th, 2015, 2:35 pm
Posts: 392
Location: Slough, England UK
Poor sad kevi . such a pillock,
but then only to be expected, as the best part of him ran down his mums leg.


anyway back to the subject ..

Boomer how do I know ?
well that might just be because a very old close friend of mine just happens to have a 55mph boat down on
the sabine that these fools cant catch.
now a genuine 55mph boat should be dead easy for a 70mph boat to go past ?
the only ones who can catch him and go past use the blue bottles of NOS, he knows that as he sells the stuff.
( now anyone who goes down there will know who I am talking about).



this is a clip of their video, not one of mine.
this is their 60mph 10ft boat ha ha

Image

if you think this can do 70mph then your the fucking idiot, not me.


Top
 Profile Send private message  
 PostPosted: March 8th, 2016, 1:41 pm   
Drag Racing Sponsor

Joined: October 30th, 2012, 12:14 am
Posts: 698
Location: Palmerston
phillnjack wrote:
Poor sad kevi . such a pillock,
but then only to be expected, as the best part of him ran down his mums leg.


anyway back to the subject ..

Boomer how do I know ?
well that might just be because a very old close friend of mine just happens to have a 55mph boat down on
the sabine that these fools cant catch.
now a genuine 55mph boat should be dead easy for a 70mph boat to go past ?
the only ones who can catch him and go past use the blue bottles of NOS, he knows that as he sells the stuff.
( now anyone who goes down there will know who I am talking about).



this is a clip of their video, not one of mine.
this is their 60mph 10ft boat ha ha

Image

if you think this can do 70mph then your the fucking idiot, not me.


You expect us to believe you have friends? :lol: Now who's making up stories? :roll: :mrgreen:

_________________
Image
13' Rapid Craft 15" OMC 56
13' Critchfield 15" OMC 56
19' Laser 380 Ray (Future Project)


Top
 Profile Send private message  
 PostPosted: March 8th, 2016, 2:09 pm   
Member
User avatar

Joined: September 15th, 2015, 2:35 pm
Posts: 392
Location: Slough, England UK
is that all you've got ?

you need a name change. " Thrush " comes to mind


Top
 Profile Send private message  
 PostPosted: March 8th, 2016, 3:51 pm   
Drag Racing Sponsor

Joined: October 30th, 2012, 12:14 am
Posts: 698
Location: Palmerston
phillnjack wrote:
is that all you've got ?

you need a name change. " Thrush " comes to mind


No need to get nasty phill. I'm just having fun. So how did the new big bore carbs work for ya? Did you manage to smash 42 yet?

_________________
Image
13' Rapid Craft 15" OMC 56
13' Critchfield 15" OMC 56
19' Laser 380 Ray (Future Project)


Top
 Profile Send private message  
 PostPosted: March 8th, 2016, 6:06 pm   
Member
User avatar

Joined: September 15th, 2015, 2:35 pm
Posts: 392
Location: Slough, England UK
me get nasty ? :lol: I wouldn't dream of it.
I dont get angry, ya never win a fight if you lose control.

As for testing the carbs !!! not a chance due to shitty uk weather .
local slipway to me has also been out of bounds due to renovations so the river has been a no no.
the sea this time of year is normally a touch rough, but we have had about 2 months of crazy winds bringing in abnormal waves ( surfers have been loving it.
I dont expect to get much over 45mph on the next trip to be honest. never know the fucker might sink.

there is another boat same as mine that uses a hotted up 1992 56 cu in bridgeport engine with boyesen reeds
and been ported when rebuilt.
he uses a 12 3/4 x 19 powertech prop and gets 43.5 mph at 6,000 rpm
so that's 1.2mph more than me with 100 rpm more too. with a slip of under 3%. still using original 60hp carbs.


mine is standard reeds, no porting, total bog standard with 13x19 5900 rpm 42.3.mph slip of 3.54%

with the bigger 70hp carbs I am only hoping for about 6300 rpm with same prop .

as you can see these boats run very wet, they cry out for a bow lifting prop to be used for higher speed.

this is another Orkney dory 4 metre with the 1992 60 bridgeport
https://www.youtube.com/watch?v=H00TSS1Uvp4


Top
 Profile Send private message  
 PostPosted: March 8th, 2016, 6:53 pm   
Drag Racing Sponsor

Joined: October 30th, 2012, 12:14 am
Posts: 698
Location: Palmerston
phillnjack wrote:
me get nasty ? :lol: I wouldn't dream of it.
I dont get angry, ya never win a fight if you lose control.

As for testing the carbs !!! not a chance due to shitty uk weather .
local slipway to me has also been out of bounds due to renovations so the river has been a no no.
the sea this time of year is normally a touch rough, but we have had about 2 months of crazy winds bringing in abnormal waves ( surfers have been loving it.
I dont expect to get much over 45mph on the next trip to be honest. never know the fucker might sink.

there is another boat same as mine that uses a hotted up 1992 56 cu in bridgeport engine with boyesen reeds
and been ported when rebuilt.
he uses a 12 3/4 x 19 powertech prop and gets 43.5 mph at 6,000 rpm
so that's 1.2mph more than me with 100 rpm more too. with a slip of under 3%. still using original 60hp carbs.


mine is standard reeds, no porting, total bog standard with 13x19 5900 rpm 42.3.mph slip of 3.54%

with the bigger 70hp carbs I am only hoping for about 6300 rpm with same prop .

as you can see these boats run very wet, they cry out for a bow lifting prop to be used for higher speed.

this is another Orkney dory 4 metre with the 1992 60 bridgeport
https://www.youtube.com/watch?v=H00TSS1Uvp4


Just kidding. I don't give a fuck.

_________________
Image
13' Rapid Craft 15" OMC 56
13' Critchfield 15" OMC 56
19' Laser 380 Ray (Future Project)


Top
 Profile Send private message  
 PostPosted: March 8th, 2016, 8:19 pm   
User Requested 1 Month Ban - Denied

Joined: April 8th, 2012, 8:11 am
Posts: 1297
Cut'r back about 20% :mrgreen:

_________________
DBR 300xs


Top
 Profile Send private message  
 PostPosted: March 8th, 2016, 8:20 pm   
Drag Racing Sponsor

Joined: October 30th, 2012, 12:14 am
Posts: 698
Location: Palmerston
KAL Racing wrote:
Cut'r back about 20% :mrgreen:


Hard No! Easy there big chutes :mrgreen:

_________________
Image
13' Rapid Craft 15" OMC 56
13' Critchfield 15" OMC 56
19' Laser 380 Ray (Future Project)


Top
 Profile Send private message  
 PostPosted: March 8th, 2016, 8:28 pm   
User Requested 1 Month Ban - Denied

Joined: April 8th, 2012, 8:11 am
Posts: 1297
Thats whats I likes abouts you Kati :lol:

_________________
DBR 300xs


Top
 Profile Send private message  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 27 posts ]  Go to page Previous  1, 2, 3  Next

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 12 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  


Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Style originally created by Volize © 2003 • Redesigned SkyLine by MartectX © 2008 - 2010