T BOAT STUFF YOU WANT TO SELL..RIGGING, PROPS, EQUIPMENT etc

DoktorC · **Posted:** November 18th, 2012, 9:51 am

Ya....I'll take the yamaha set if there isn't too big of a line up for them

. Can you do rainbow anodizing????

LittleCharger · **Joined:** April 1st, 2012, 12:29 am **Posts:** 1445

DoktorC wrote:

Can you do rainbow anodizing????

Don't you mean pink!

Not that there is anything wrong with that.

DoktorC · **Posted:** November 18th, 2012, 10:47 am

LittleCharger wrote:

DoktorC wrote:

Can you do rainbow anodizing????

Don't you mean pink!

Not that there is anything wrong with that.

I'll do them any colour you like.....since you the one looking at them... :lol:

Hounddog · **Joined:** April 3rd, 2012, 1:52 pm **Posts:** 3165

fibertron wrote:

For the guys looking for steering bars... Yamaha 70....

Gig will the 70 yamaha ones mount on the engine bolts same as the OMCs? I welded plates onto the sides of a Yamaha powerhead base plate to attach the steering bars because the front steering arm mount style [650XS] hit the rear boat cowl. If yours mount on the bolts please make me a set.

Hounddog · **Joined:** April 3rd, 2012, 1:52 pm **Posts:** 3165

55 HP Nissan with power trim $250.00

Needs gears..should not be difficult to find. Motor looks clean. Its the 2 cylinder model. On a VooDoo or Delta their a 55+ mph motor. More torque than the OMC and maybe 1 to 1.5 mph less top end than the OMC. All your Mercury and yamaha props fit. My guess would be to run an 11 x 18 or 20.

http://ontario.kijiji.ca/c-cars-vehicle ... Z432146251

Here is a picture of the powerhead
http://www.ebay.com/itm/Nissan-Tohatsu- ... 1406wt_892

Zonka · **Posted:** November 19th, 2012, 12:03 am

Pink ones will be sick! I've got the stock silver and they work great! 8-)

Zonka · **Posted:** November 19th, 2012, 12:04 am

They were also a contributing factor in my second place high points for 2012!

Hounddog · **Joined:** April 3rd, 2012, 1:52 pm **Posts:** 3165

Hounddog wrote:

I don't know why so many T guys think this flywheel will make any difference. If? we were doing a LeMans start and its a World Championship maybe. It is only a bit lighter. Your not allowed to run the CC Mod 50 flywheel which is half the weight.
Anyway here is another picture of one on a powerhead.

http://www.ebay.com/itm/1973-Johnson-Ev ... 827wt_1129

Has anyone weighed one of the last verson flywheels?
Like the one on this powerhead.

http://www.ebay.com/itm/JOHNSON-70-HP-P ... 120wt_1129

fibertron · **Joined:** March 31st, 2012, 11:33 pm **Posts:** 60

Don the yamaha wingplates use the powerhead bolts the same as my omc winplates, ill put you down for a set!!

Hounddog · **Joined:** April 3rd, 2012, 1:52 pm **Posts:** 3165

Ron Hill has a wide range of T props for every motor. He has both over hub and thru hub styles. It is best to contact him through his site not EBAY. Most times he will sell the prop to a racer in the $250.00 range. This is a good option for those on a budget. You can have a local guy do the reworking. Jeff Titus in Florida is excellent and several T Guys run his props. Jeff's cost is more that double the cost of a Hill prop, but still very good value. A lab Mercury prop will cost you even more money. The advantage of the Mercury prop is resale value. They always seem to be worth $500. to $600. used. If? you can find a good condition used Mercury prop, you will be able to resale it for the price you paid.

Here is an example of one of Ron Hills props on EBAY. Check his store for the others.

http://www.ebay.com/itm/Evinrude-40-75- ... 173wt_1170

HPBCANADA.COM

T BOAT STUFF YOU WANT TO SELL..RIGGING, PROPS, EQUIPMENT etc

Who is online