It is currently November 23rd, 2024, 5:31 am

1990'S MERCURY SHORT SHAFT 40-60 HP 822864A1 SWIVEL BRACKET

View active topics

All times are UTC - 5 hours [ DST ]


Post new topic Reply to topic  [ 10 posts ] 
Author Message
 PostPosted: December 10th, 2020, 12:00 am   
Team Member
User avatar

Joined: April 3rd, 2012, 1:52 pm
Posts: 3165
I am looking for one of these....even the complete motor.

Here is one:
https://storage.bhs.cloud.ovh.net/v1/AU ... 58083b.jpg

The problem with running a T750 SHORT SHAFT Mercury is the factory power trim. The only factory late model style trim bracket were on these models...40 hp 4 cylinder.


Top
 Profile Send private message  
 PostPosted: December 10th, 2020, 11:35 am   
Team Member
User avatar

Joined: April 3rd, 2012, 1:52 pm
Posts: 3165
EMAIL: The 4 cylinder mercury would not be as good as the 3 cylinder 60 hp.

That 15 inch mid is the same mid used on the 60 hp. The 60 has the 60 base plate to mount the triple.
There are several versions of the 49 cubic inch triple. Prior to 1975 and the OMC Nitro case, the mercury was very competitive in FE. After the appearance of the Delta hull you didn’t see any twin carb mercury’s in FE only the 650XS. The XS was not an easy model to maintain and keep running so many lake runners ran twin carb models on their delta.
It was said that those early twin carb triples ran low 60 mph on delta hulls.....hard to prove without GPS.
I do think it is possible, but, you definitely need the 150 compression high dome pistons in the motor and a good exhaust tuner.


Top
 Profile Send private message  
 PostPosted: December 12th, 2020, 9:18 am   
Member

Joined: December 23rd, 2014, 4:59 pm
Posts: 181
Location: Kawartha Lakes
Steve Humphreys 1990 voodoo runs 62-63 with a 1990 mercury 60hp twin carb with 20 mini chopper.
Very light boat.


Top
 Profile Send private message  
 PostPosted: December 12th, 2020, 11:40 am   
Member

Joined: December 23rd, 2014, 4:59 pm
Posts: 181
Location: Kawartha Lakes
Dave Elsey has 15" mercury 3banger mids


Top
 Profile Send private message  
 PostPosted: December 12th, 2020, 1:03 pm   
Team Member
User avatar

Joined: April 3rd, 2012, 1:52 pm
Posts: 3165
Streamin wrote:
Dave Elsey has 15" mercury 3banger mids


INTERESTING TIMING!
Dave’s emails:
On Thursday, December 10, 2020, Dave Elsey wrote:
I'm not parting out. I want to sell everything at once. No time yet to itemize.

$2000.00 seems fair to me.
I believe there's three fully assembled ready to go 15" lower units with both [1.6, 1.8]gear ratios, and enough parts to build at least one more engine complete and 1 complete motor. I know there's a control box cables, a very custom hydraulic side steering setup and some power trim stuff. There's even a complete long shaft with power trim that had blown a piston included. Might even be a new decal set.

Capt Dave


Top
 Profile Send private message  
 PostPosted: December 12th, 2020, 7:26 pm   
Member
User avatar

Joined: June 5th, 2015, 8:56 am
Posts: 533
Streamin is spreading LIES! well.. kinda.
I think maybe 61mph for that awesome merc60 Voodoo..
unless Humphrey is finding speed somehow with magic tune, or less double cheeseburgers...

_________________
Critchfield T850 OMC 56ci
Delta T750 Yamaha 55
1989 Voodoo Yamaha 70
1980 Thundercraft v142 Restored


Top
 Profile Send private message  
 PostPosted: December 13th, 2020, 9:35 am   
Team Member
User avatar

Joined: April 1st, 2012, 12:29 am
Posts: 1445
mattmak wrote:
Streamin is spreading LIES! well.. kinda.
I think maybe 61mph for that awesome merc60 Voodoo..
unless Humphrey is finding speed somehow with magic tune, or less double cheeseburgers...


Too fast for us !

What does that voodoo weigh ?

_________________
Bullet 20 cc Super Comp
Delta with a slow 56
Jcraft with a ProV 150


Top
 Profile Send private message  
 PostPosted: December 13th, 2020, 3:44 pm   
Member

Joined: December 23rd, 2014, 4:59 pm
Posts: 181
Location: Kawartha Lakes
Stringer boat. Balsa dash and transom.
Weighs about 180 i believe.
Topgun would know...his old boat


Top
 Profile Send private message  
 PostPosted: December 13th, 2020, 7:52 pm   
Team Member

Joined: April 3rd, 2012, 10:03 am
Posts: 813
Location: Gravenhurst, Ontario
Streamin wrote:
Stringer boat. Balsa dash and transom.
Weighs about 180 i believe.
Topgun would know...his old boat


Is it the twin to your old boat?


Top
 Profile Send private message  
 PostPosted: December 14th, 2020, 10:07 am   
Member

Joined: December 23rd, 2014, 4:59 pm
Posts: 181
Location: Kawartha Lakes
The boat we'r talking about is an old style Greg.
He does also have a new 2020 voodoo as well.

I miss my white boat


Top
 Profile Send private message  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 10 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 12 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  


Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Style originally created by Volize © 2003 • Redesigned SkyLine by MartectX © 2008 - 2010