It is currently November 24th, 2024, 8:00 pm

Can a 60 hp E-TEC mount on a 40 E-TEC midsection?

View active topics

All times are UTC - 5 hours [ DST ]


Post new topic Reply to topic  [ 61 posts ]  Go to page 1, 2, 3, 4, 5 ... 7  Next
Author Message
 PostPosted: February 15th, 2016, 9:31 pm   
Team Member
User avatar

Joined: April 3rd, 2012, 1:52 pm
Posts: 3169
i had this question asked. I have no idea. The sender says the two blocks are the same. The 40 hp cannot be made into a 60hp. The 40 hp has a small lower unit and comes in a 15 inch midsection. TRUE?? Possible? These motors have been around for a few years and there are parts motors out there. I am sure someone would have done the switch before now. Or this fellow is on to something. If doable I for one is interested it how it ran.


Top
 Profile Send private message  
 PostPosted: February 16th, 2016, 12:40 am   
Team Member
User avatar

Joined: April 3rd, 2012, 1:52 pm
Posts: 3169
The motors are 864 blocks. I cannot find a 15 inch 40 hp? Some pictures look like 15's but there all 20 inch.


Top
 Profile Send private message  
 PostPosted: February 16th, 2016, 11:27 am   
Team Member

Joined: April 10th, 2012, 1:37 pm
Posts: 290
Location: Dunnville
Don,

From what i had researched before i THINK they are all 20 inch mids, the 40 -60 share the same big gearcase, the 60 has a different tuner.

_________________
#49 Triple C Racing
T750 Delta/ omc


Top
 Profile Send private message  
 PostPosted: February 16th, 2016, 11:54 am   
Member
User avatar

Joined: June 5th, 2015, 8:56 am
Posts: 533
it is unfortunate that they are not available with a better lower for lighter boats.

_________________
Critchfield T850 OMC 56ci
Delta T750 Yamaha 55
1989 Voodoo Yamaha 70
1980 Thundercraft v142 Restored


Top
 Profile Send private message  
 PostPosted: February 16th, 2016, 12:16 pm   
Team Member
User avatar

Joined: April 3rd, 2012, 1:52 pm
Posts: 3169
Thanks guys for the input. The 30 hp E-TEC is the highest hp model I can find with the short shaft version. There was a VooDoo up north with an E-TEC but I don't have information on how it ran. Down the road as the older motors become less popular with the racers I can see us using a custom mid and lower unit that racers can mount different makes of power heads .
Similar to what Bass manufactures. Then we will see E-TEC engines.


Top
 Profile Send private message  
 PostPosted: February 16th, 2016, 1:24 pm   
Team Member

Joined: April 10th, 2012, 1:37 pm
Posts: 290
Location: Dunnville
i was offered a deal on a 60etec when i was building the delta..at the time i did not know any better, turned it down,since then i read up alot on them... talk about kick myself as it would have been nice to try

_________________
#49 Triple C Racing
T750 Delta/ omc


Top
 Profile Send private message  
 PostPosted: February 18th, 2016, 10:47 am   
Team Member
User avatar

Joined: April 3rd, 2012, 1:52 pm
Posts: 3169
Here is one for sale.
The large gear case would hurt, but, power wise these are said to perform as good as a 70 hp two stroke on the same hull.

http://www.kijiji.ca/v-powerboat-motorb ... nFlag=true


Looking at the mid it looks unlikely you could shorten it to 15 or 16 inches.

http://www.ebay.com/itm/2008-Johnson-Ev ... Gx&vxp=mtr


Top
 Profile Send private message  
 PostPosted: February 18th, 2016, 11:10 am   
Drag Racing Sponsor

Joined: October 30th, 2012, 12:14 am
Posts: 698
Location: Palmerston
Lower unit looks just like a 70hp large case. I wonder if the bolt pattern is the same. Could maybe bolt a nitro to it?

_________________
Image
13' Rapid Craft 15" OMC 56
13' Critchfield 15" OMC 56
19' Laser 380 Ray (Future Project)


Top
 Profile Send private message  
 PostPosted: February 18th, 2016, 12:15 pm   
Member
User avatar

Joined: June 5th, 2015, 8:56 am
Posts: 533
Hounddog wrote:
The large gear case would hurt, but, power wise these are said to perform as good as a 70 hp two stroke on the same hull.



From what I've read on other forums, the Etec 60 is not as strong as the older OMC 60/70hp 3cyls. Most of that comes from reports by Whaler Classic/Sport 15 owners on continuouswave.com, as they re-power older OMCs to newer engines.

_________________
Critchfield T850 OMC 56ci
Delta T750 Yamaha 55
1989 Voodoo Yamaha 70
1980 Thundercraft v142 Restored


Top
 Profile Send private message  
 PostPosted: February 18th, 2016, 4:39 pm   
Team Member
User avatar

Joined: April 3rd, 2012, 1:52 pm
Posts: 3169
Since I own a 15 foot Classic Whaler I had read some of the comments.
I based my comment on this thread on replies similar to this one;
http://continuouswave.com/ubb/Forum4/HTML/003720.html
Those E-TEC 60 numbers are very similar to the numbers I get with a 2003 Yamaha 70 on my 15 Super Sport. Looks to be a strong 60

Now you can be totally correct. The performance is equal to a 70 Yamaha but not equal to the 60 or 70 OMC motors. Set up means a lot on every boat so this is likely the reason some perform better than others. All seem to agree the 60 E-TEC has a lot of punch and that is very important if you were racing.


Top
 Profile Send private message  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 61 posts ]  Go to page 1, 2, 3, 4, 5 ... 7  Next

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 0 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  


Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Style originally created by Volize © 2003 • Redesigned SkyLine by MartectX © 2008 - 2010