It is currently November 22nd, 2024, 8:01 am

Chargerl Dl set up

View active topics

All times are UTC - 5 hours [ DST ]


Post new topic Reply to topic  [ 13 posts ]  Go to page 1, 2  Next
Author Message
 PostPosted: September 30th, 2014, 12:15 pm   
Member
User avatar

Joined: September 18th, 2014, 10:22 am
Posts: 24
Location: Chandos Lake/ Thornhill
Hey everyone, just wondering if you guy think putting a low water pickup on my charger dl with 225ficht will make a big difference in performance, and how easy is installation? Thanks!

_________________
Charger DL 225 ficht - 83mph
Chandos Lake


Top
 Profile Send private message  
 PostPosted: September 30th, 2014, 12:30 pm   
Team Member
User avatar

Joined: April 4th, 2012, 2:04 pm
Posts: 879
Location: Mississauga
depends, what propshaft height are you running, prop? setback? how fast do you want to go? The cone on the lower will only help if you jack the motor up high, with a 6" setback jackplate you would need the propshaft centreline up to3/4" to 1/2" under the pad with a 28p to 30 p chopper to get around 80 mph depending how healthy your motor is. dual cable steering a water pressure guage are must haves. solid motor mounts are suggested too. This is a decent starting point , the charger experts will chime in soon I bet.

Steve

_________________
1991 Hydrostream AE-21 2002 OMC modd


Top
 Profile Send private message  
 PostPosted: September 30th, 2014, 12:39 pm   
Member
User avatar

Joined: September 18th, 2014, 10:22 am
Posts: 24
Location: Chandos Lake/ Thornhill
Currently running on a 23p prop with a 6" jack plate, but i start chime walking at about 78mph according to my gps. Just got a dual cable steering system but my water pressure gauge just blew :/

_________________
Charger DL 225 ficht - 83mph
Chandos Lake


Top
 Profile Send private message  
 PostPosted: September 30th, 2014, 12:55 pm   
Team Member
User avatar

Joined: April 4th, 2012, 2:04 pm
Posts: 879
Location: Mississauga
somethings wrong here, with a 23p prop and omc 1.87 lower you would be low to mid 60's tops reving 6200 rpm.

_________________
1991 Hydrostream AE-21 2002 OMC modd


Top
 Profile Send private message  
 PostPosted: September 30th, 2014, 1:50 pm   
Team Member
User avatar

Joined: April 29th, 2012, 7:26 pm
Posts: 503
beavertonae-21 wrote:
somethings wrong here, with a 23p prop and omc 1.87 lower you would be low to mid 60's tops reving 6200 rpm.


agreed Steve.

I wouldn't put a LWP on the engine until you get the various details figured out. Those boats run really nice without a cone. They "can" run better with a LPW, but not much, and they need to be setup correctly to gain anything from a LWP.

Get all your RMP, Speed, Water pressure, Engine heights, Gear case gear ratios figured out first. Then if you feel you can gain from raising the engine higher, go for the LWP.

Better yet - see if you can borrow a case that has a cone already installed. Then you can compare.

But - you really need to know where you are starting from with the above info - otherwise your going to be chasing your tail around the lake.

Good luck -


Top
 Profile Send private message  
 PostPosted: September 30th, 2014, 3:11 pm   
Member
User avatar

Joined: September 18th, 2014, 10:22 am
Posts: 24
Location: Chandos Lake/ Thornhill
Image

little confused then just going of my gps, its a few mph of my speedo in the boat. I guess il just have to come out for a few HPBC runs next season then :twisted:

_________________
Charger DL 225 ficht - 83mph
Chandos Lake


Top
 Profile Send private message  
 PostPosted: September 30th, 2014, 6:39 pm   
Member
User avatar

Joined: August 30th, 2012, 11:21 am
Posts: 325
banw7730 wrote:
Image

little confused then just going of my gps, its a few mph of my speedo in the boat. I guess il just have to come out for a few HPBC runs next season then :twisted:

Yes something is off, your not going that speed with a 23" prop unless your motor is turning around 7500 rpm, not likely. :roll:
Let's see a pic of the prop, maybe it's been mis-identified.


Top
 Profile Send private message  
 PostPosted: September 30th, 2014, 8:30 pm   
Team Member
User avatar

Joined: April 29th, 2012, 7:26 pm
Posts: 503
allstock wrote:
banw7730 wrote:
Image

little confused then just going of my gps, its a few mph of my speedo in the boat. I guess il just have to come out for a few HPBC runs next season then :twisted:

Yes something is off, your not going that speed with a 23" prop unless your motor is turning around 7500 rpm, not likely. :roll:
Let's see a pic of the prop, maybe it's been mis-identified.


Ya - that makes sense Mike. Could be a mis identification of the prop pitch. that would solve the mystery.
I've found the Iphone app GPS's to pretty accurate.


Top
 Profile Send private message  
 PostPosted: September 30th, 2014, 8:31 pm   
HPBC PRESIDENT
User avatar

Joined: March 31st, 2012, 5:53 pm
Posts: 3548
Location: Lapping lil charger
The 3 could be an 8...

_________________
08 SRV w/3.1 Hydro-tec Phase lll

I've got enough torque to tear a hole....in time...


Top
 Profile Send private message  
 PostPosted: September 30th, 2014, 9:15 pm   
Member
User avatar

Joined: September 18th, 2014, 10:22 am
Posts: 24
Location: Chandos Lake/ Thornhill
You boys got me worried now because I know its a 23p prop, hope my motor isn't spinning way past redline :/

_________________
Charger DL 225 ficht - 83mph
Chandos Lake


Top
 Profile Send private message  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 13 posts ]  Go to page 1, 2  Next

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 28 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  


Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Style originally created by Volize © 2003 • Redesigned SkyLine by MartectX © 2008 - 2010