HPBCANADA.COM
https://hpbc.ca/

NICE TO SEE ANOTHER "NEW" BOAT ON THE MARKET!!
https://hpbc.ca/viewtopic.php?f=51&t=4135		 Page 1 of 2
Author:  Hounddog [ February 7th, 2019, 1:47 pm ]
Post subject:  NICE TO SEE ANOTHER "NEW" BOAT ON THE MARKET!!
NEW MURPHY...$4800.00 plus TAX
https://www.facebook.com/groups/OPBRA/
Author:  MarkStein [ February 8th, 2019, 10:09 am ]
Post subject:  Re: NICE TO SEE ANOTHER "NEW" BOAT ON THE MARKET!!
They look awesome!!
Author:  Dougw [ February 9th, 2019, 8:42 am ]
Post subject:  Re: NICE TO SEE ANOTHER "NEW" BOAT ON THE MARKET!!
Very unique hull. Does it pack air and lift like a tunnel v at a certain speed or still ride like a v bottom on the pad?
Author:  Murph [ February 9th, 2019, 5:04 pm ]
Post subject:  Re: NICE TO SEE ANOTHER "NEW" BOAT ON THE MARKET!!
Dougw wrote:
Very unique hull. Does it pack air and lift like a tunnel v at a certain speed or still ride like a v bottom on the pad?


Both, packs good air under it.
More v then tunnel, sponsons ride out of water at speed.
Shot this holding the camera, one handed driving with set trim. LOL
Controls chin walking and adds stability when the waves toss you about.
https://www.youtube.com/watch?v=CcOLyPFVbAk&t=2s
Author:  Hounddog [ February 12th, 2019, 10:39 am ]
Post subject:  Re: NICE TO SEE ANOTHER "NEW" BOAT ON THE MARKET!!
Murph, if you do get more boat requests and are not interested in building more 13's, Andrew and Thom on this site are interested in building a new design Delta. They may find your hull is a better option. Both fellows have worked at Canadian Hydrostream. Maybe? a Royalty plan could be arranged or some other arrangement. Would be nice to see more of these hulls on the water........JUST A THOUGHT!
Author:  Murph [ February 13th, 2019, 11:39 am ]
Post subject:  Re: NICE TO SEE ANOTHER "NEW" BOAT ON THE MARKET!!
Hounddog wrote:
Murph, if you do get more boat requests and are not interested in building more 13's, Andrew and Thom on this site are interested in building a new design Delta. They may find your hull is a better option. Both fellows have worked at Canadian Hydrostream. Maybe? a Royalty plan could be arranged or some other arrangement. Would be nice to see more of these hulls on the water........JUST A THOUGHT!


I got lots of interest in making, it's the interest in buying that's always been the issue.
Author:  sharpeye Mike [ February 13th, 2019, 7:31 pm ]
Post subject:  Re: NICE TO SEE ANOTHER "NEW" BOAT ON THE MARKET!!
Murph what kind of speed are you getting with your setup?
What is it rated for?
And last but not least. How much horse power do you think she will handle?
Author:  Murph [ February 13th, 2019, 8:29 pm ]
Post subject:  Re: NICE TO SEE ANOTHER "NEW" BOAT ON THE MARKET!!
sharpeye Mike wrote:
Murph what kind of speed are you getting with your setup?
What is it rated for?
And last but not least. How much horse power do you think she will handle?


There's only 2 of them and there almost 30 years old. LOL
One reason they are still around is they are solidly built.
One with a 90 Merc mid 50's and the other 115 Merc mid 60's.
Not the fastest motors, low rev'ers.
Never tried a light Drag before.

Two guys and a 115 Merc & still floating.
https://www.youtube.com/watch?v=r8UozSNZCmI
Author:  Hounddog [ February 14th, 2019, 9:13 am ]
Post subject:  Re: NICE TO SEE ANOTHER "NEW" BOAT ON THE MARKET!!
If the boat weighed the same as a VooDoo it would appeal to the larger group that run 40 to 70 hp motors.
Author:  idvette [ February 14th, 2019, 8:35 pm ]
Post subject:  Re: NICE TO SEE ANOTHER "NEW" BOAT ON THE MARKET!!
The one listed on Facebook as I understand was built lighter than the other 2 older boats. If someone has a scale they're willing to lend out, I have a chain block and can help Chris with weighing it. I travel a lot between Peterborough and Huntsville, could do a pickup along the way
Page 1 of 2 All times are UTC - 5 hours [ DST ]
© 2000, 2002, 2005, 2007 phpBB Group • http://www.phpbb.com