| HPBCANADA.COM https://hpbc.ca/ |
|
| AOF 3 cylinder Outboard drag racing rules https://hpbc.ca/viewtopic.php?f=51&t=3511 |
Page 1 of 5 |
| Author: | Hounddog [ September 26th, 2016, 6:24 pm ] |
| Post subject: | AOF 3 cylinder Outboard drag racing rules |
I have seen a few events posted on other sites. Does anyone have a copy of the rules? |
|
| Author: | Northbase [ September 26th, 2016, 7:26 pm ] |
| Post subject: | Re: AOF 3 cylinder Outboard drag racing rules |
I'll get them from one of the guys in DSRA. They ran in Morgan City this past weekend. |
|
| Author: | Hevi Kevi [ September 26th, 2016, 7:34 pm ] |
| Post subject: | Re: AOF 3 cylinder Outboard drag racing rules |
I'd be curious to see that too. I saw the post on BRF. |
|
| Author: | MGR [ September 26th, 2016, 8:19 pm ] |
| Post subject: | Re: AOF 3 cylinder Outboard drag racing rules |
I second that!!! |
|
| Author: | Northbase [ September 26th, 2016, 8:49 pm ] |
| Post subject: | Re: AOF 3 cylinder Outboard drag racing rules |
Apparently it ran as a demonstration class. There's been strong interest and they're going to be establishing a set of rules for the class during thier annual rules meeting. |
|
| Author: | LittleCharger [ September 26th, 2016, 10:43 pm ] |
| Post subject: | Re: AOF 3 cylinder Outboard drag racing rules |
http://www.southeasterndragboat.com |
|
| Author: | Hevi Kevi [ September 27th, 2016, 1:32 am ] |
| Post subject: | Re: AOF 3 cylinder Outboard drag racing rules |
I like this. Unlimited would be fun to build for... Outlaw could get out of control really quick on the wallet even when you can make your own parts. Do they really get the numbers to support all these classes or is that just to see where interest is? |
|
| Author: | Hounddog [ September 27th, 2016, 7:56 am ] |
| Post subject: | Re: AOF 3 cylinder Outboard drag racing rules |
Novice Max motor size stock 40 only Must be between the age of 11-16 years old Must have boaters safety coarse completed Must wear approved helmet and life jacket 40/50 & Small CID 60 Mercury 1996 and Older Stock 130lbs compression max Stock production threw hub round ear prop. 50 carbs max Oil injection can be removed Rev limiter can be unhooked Nose cone can be added Max piston size .040" over stock bore No drilled exhaust Close to our T750 rules Super Stock – Chopper prop ONLY 150lbs compression max Low water pick up and nose cone Disconnect rev limiter Stock reed cages Fiber reeds Lightened fly wheel Old or new style head Porting to existing ports (Intake and exhaust) Up to 70 carbs, stock venturi Chopper props ONLY Any tuner allowed No finger ports No power ports No ports other than what came in production block from factory No extra exhaust plate or spacer Power ports only allowed in blocks that are from the factory Max piston size .040" over stock No piston modifications No shortened midsection No quickie lower unit Factory stroke crankshaft Modified Same as Super Stock but can add finger ports and or power ports Can modify stock size reed cages No rule on compression Any head allowed Any electronics Max piston size .040" over stock Any style prop allowed Factory stroke crankshaft Shortened midsection allowed 60/70 Includes 1997 and later 40-60 mercury (59 CID) Stock 130 lb compression max 70 carbs max stock venturi Oil injection can be removed Rev limiter can be removed Nose cone can be added Max piston size .040" over stock No drilled exhaust Close to our T-850 rules Super Stock 150lbs compression max Lightened flywheel Up to 90 carbs, stock venturi Low water pick up and nose cone Rev limiter can be removed Fiber reeds Stock reed cages Porting allowed to existing ports (intake and exhaust) Power ports only allowed in blocks that are from the factory No finger ports No extra exhaust plate on space allowed Any tuner allowed Max piston size .040" over stock No piston modifications Factory stroke crankshaft Modified Same as Super Stock but can add finger ports and or power ports Can modify stock size reed cages No rule on compression Any head allowed Any electronics Max piston size .040" over stock Factory stroke crankshaft Shortened midsection allowed |
|
| Author: | Hevi Kevi [ September 27th, 2016, 9:07 am ] |
| Post subject: | Re: AOF 3 cylinder Outboard drag racing rules |
Unlimited Any 3 cylinder production block Any Modifications No Nitrous Oxide No Turbocharger No Supercharger Outlaw Any 3 cylinder engine Any modification Nitrous Oxide allowed Turbocharger allowed Supercharger allowed |
|
| Author: | Hounddog [ September 27th, 2016, 9:53 am ] |
| Post subject: | Re: AOF 3 cylinder Outboard drag racing rules |
Hevi Kevi wrote: I like this. Unlimited would be fun to build for... Outlaw could get out of control really quick on the wallet even when you can make your own parts. Do they really get the numbers to support all these classes or is that just to see where interest is? Looking at the pictures on the site there are no modified boats pictured. There appears to be mostly 50 hp stuff. I did not see any boat weighs listed. Most popular are the river and Jon boats. I think they are seeing where the interest is at this point. IF? Drag wanted to include T in their classes then T could decide what rules they wanted. Some people currently not racing in T may want to just drag race instead. Provided drag wants to look at 3 cylinder drag as a new class, I suggest you initially make the class simple to allow as many entries as possible. I would have weight limits. The bigger the power the more weight. |
|
| Page 1 of 5 | All times are UTC - 5 hours [ DST ] |
| © 2000, 2002, 2005, 2007 phpBB Group • http://www.phpbb.com | |