It is currently November 21st, 2024, 6:47 pm

Jackets / Vests

View active topics

All times are UTC - 5 hours [ DST ]


Post new topic Reply to topic  [ 55 posts ]  Go to page 1, 2, 3, 4, 5, 6  Next
Author Message
 PostPosted: December 25th, 2015, 10:45 pm   
Team Member

Joined: August 20th, 2012, 11:27 am
Posts: 1028
Location: Brooklin
A note moving forward.
All racers MUST wear a competition approved vest / jacket from one of the normal manufacturers. ( Lifeline , SRP etc )
It MUST be a competition vest and NOT a "Sport" or "Poker Run" version.
We must be in compliance and it's only fitting you would want to protect yourself.

Cheers :)

** I tried to post this on the other Canadian performance boating site but it's telling me I do not have permission **

_________________
2015 TORC Lake Racer Champion & ODBA Lake Racer 3rd Place World Championship
2014 TORC & ODBA Lake Racer World Champion !!!
2017 OSCA True Street champion / ET record holder 8.55 / MPH record holder 168.8mph
2017 OGW Nitrous Shootout Champion
2016 OSCA True Street champion
2015 OSCA 8.90 2nd in Championship

..... just a little SBF at 8.39


Last edited by Jeff Yammer on December 26th, 2015, 2:18 pm, edited 1 time in total.

Top
 Profile Send private message  
 PostPosted: December 26th, 2015, 1:23 am   
Team Member

Joined: April 5th, 2012, 6:58 pm
Posts: 717
Dear Drag/Jeff/Dean,

It's great how this class is maturing, implementing and enforcing(not popular with everyone) its own rules & with integrity; it's evident how Jeff's car racing experience lends itself here, Dean's skill set & approach is also key.

Drag is following similar trajectory as T, a few early years building critical mass, now stricter rule/safety enforcement, while promoting growth encouraging Newbies to participate. Jeff & Dean's regular off season updates and discussion prompts to move needle forward are smart to prepare class/drivers for Spring, manage expectations, to an evolving & higher standard.(Honorable mention: similar strategic M.O. as from Hounddog's T playbook).

Since appearing on TORC's horizon, I have been a Drag proponent, if for no other reason than economic rationale when TORC's long term financial future seemed challenging. Drag has been a great addition, it is an equal partner with T & stock outboard, need not feel as the red haired orphan in the family. Attend meetings, get on the agenda with your concerns, propose solutions to suit your preferences. 'Nuf said on that.

My offer: if there are Drag Newbies that want to participate, do not have race jacket(& pants/sleeves), pleased to lend my/Jr's stuff to get guys on water. I'm sure other T drivers would offer same when need identified; just give us a heads up & as race day scheduling permits.

Keep up the good work guys.

Hydroid


Top
 Profile Send private message  
 PostPosted: December 27th, 2015, 2:38 pm   
Member
User avatar

Joined: October 7th, 2014, 1:20 pm
Posts: 138
Location: Roseneath On
Jeff Yammer wrote:
A note moving forward.
All racers MUST wear a competition approved vest / jacket from one of the normal manufacturers. ( Lifeline , SRP etc )
It MUST be a competition vest and NOT a "Sport" or "Poker Run" version.
We must be in compliance and it's only fitting you would want to protect yourself.

Cheers :)

** I tried to post this on the other Canadian performance boating site but it's telling me I do not have permission **

Good to know now Jeff thanks
Try posting it again on the other site thier was a server problem


Top
 Profile Send private message  
 PostPosted: December 27th, 2015, 3:03 pm   
HPBC PRESIDENT
User avatar

Joined: March 31st, 2012, 5:53 pm
Posts: 3548
Location: Lapping lil charger
Like hydroid said there's a bunch of us that will lend anyone a jacket or whatever you need to get out and race. Especially the new guys that just want to try racing before committing financially to all the safety equipment.

Is there a flak requirement for drag? I know we had to comply with that in T and I wasn't sure if that was a CBF or a TORC rule that applied to all classes.

_________________
08 SRV w/3.1 Hydro-tec Phase lll

I've got enough torque to tear a hole....in time...


Top
 Profile Send private message  
 PostPosted: December 28th, 2015, 10:29 pm   
Team Member
User avatar

Joined: April 3rd, 2012, 7:53 pm
Posts: 406
Location: Lakeport, MI
will these work ?
http://www.rcdracing.com/


Top
 Profile Send private message WWW  
 PostPosted: January 3rd, 2016, 8:42 pm   
Member

Joined: April 6th, 2014, 11:19 am
Posts: 133
sheuninck wrote:
will these work ?
http://www.rcdracing.com/


Some very good pricing on these guy's and as far as i can see would meet approval. Thanks for the link sheuninck.

Thank you Hydroid for the encouragement and push as well.

Now that the holidays are over i am looking forward to preparing for the upcoming race season in many ways.

My Sandra's motto is strong in 2016, I will be too and extend this sentiment to all racers.

Jeff and i will be getting together soon to finalize details and changes.


Top
 Profile Send private message  
 PostPosted: January 4th, 2016, 5:04 pm   
Newbie

Joined: January 4th, 2016, 4:51 pm
Posts: 3
Hi everyone I am the manufacturer of the R.C.D. jackets and cut resistant suits. I would love to answer any questions about ouf gear. Here is my phone number 231 833 0318 call or text.


Top
 Profile Send private message  
 PostPosted: January 5th, 2016, 10:34 pm   
Team Member

Joined: August 20th, 2012, 11:27 am
Posts: 1028
Location: Brooklin
To RCD :
Let discuss what you can offer for a possible group purchase. I know Bmax ( Dean ) will be contacting you shortly for his thoughts.
Your support is welcomed

Jeff

_________________
2015 TORC Lake Racer Champion & ODBA Lake Racer 3rd Place World Championship
2014 TORC & ODBA Lake Racer World Champion !!!
2017 OSCA True Street champion / ET record holder 8.55 / MPH record holder 168.8mph
2017 OGW Nitrous Shootout Champion
2016 OSCA True Street champion
2015 OSCA 8.90 2nd in Championship

..... just a little SBF at 8.39


Top
 Profile Send private message  
 PostPosted: January 6th, 2016, 7:26 pm   
Newbie

Joined: January 4th, 2016, 4:51 pm
Posts: 3
I had s conversation with Dean tonight . I give him all the details about our products. He will be making a post on here soon. If you have any questions please feel free to ask. Thanks


Top
 Profile Send private message  
 PostPosted: January 6th, 2016, 8:46 pm   
HPBC PRESIDENT
User avatar

Joined: March 31st, 2012, 5:53 pm
Posts: 3548
Location: Lapping lil charger
rcd-safety wrote:
I had s conversation with Dean tonight . I give him all the details about our products. He will be making a post on here soon. If you have any questions please feel free to ask. Thanks



Don't be afraid to post yourself....there's lots of T boat, hydroplane and drag racers here as well as rec guys that are fast enough to warrant a real jacket.

I need a cut suit myself :)....give us some details if you like.

_________________
08 SRV w/3.1 Hydro-tec Phase lll

I've got enough torque to tear a hole....in time...


Top
 Profile Send private message  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 55 posts ]  Go to page 1, 2, 3, 4, 5, 6  Next

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 5 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  


Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Style originally created by Volize © 2003 • Redesigned SkyLine by MartectX © 2008 - 2010