| HPBCANADA.COM https://hpbc.ca/ |
|
| T boats wanted and parts wanted https://hpbc.ca/viewtopic.php?f=41&t=4399 |
Page 1 of 1 |
| Author: | Hounddog [ June 10th, 2022, 8:41 am ] |
| Post subject: | T boats wanted and parts wanted |
T Boats wanted: 1 looking for Delta 2 looking for a Critchfield Parts and motors wanted: 60 hp OMC twin short shaft 1980 tp 1987 12 to 12.5 23 pitch OMC cleaver prop Single ram mercury power trim unit Pro 50 Yamaha power trim complete assembly 40-50 hp Yamaha 15 inch gearcase 48-55-60 hp 2 cylinder Yamaha or mariner 15 or 20 inch gearcase Allison style bucket seat 30 hp Yamaha 3 cylinder gearcase and or parts for same PLEASE post what you have and your asking price. Thank you Don |
|
| Author: | Hounddog [ June 17th, 2022, 1:30 pm ] |
| Post subject: | Re: T boats wanted and parts wanted |
A very interesting kit for mercury 650XS and other similar 49 short shaft models.....5 inch extension kit made by mercury marine. The complete self contained kit changes your 15 inch motor to a 20 inch long shaft just by removing the gearcase and installing the extension kit. NO modification are required to the motor and it can be converted back to a short shaft by just removing the kit. I have seen pictures of similar kits on 1500XS short shaft motors. I was not the one that discovered this kit...Tim Topping found it. The key factor is you use your original motor. You keep all the original parts. The kit contains: A 5 inch extensions for the drive shaft, water tube, shift rod, exhaust if needed. 5 inch studs to bolt the lower unit onto the midsection and for the trim tab 5 inch midsection extension If this is something that you would like message me or if you know Tim contact him. Seems like a nice kit to have so you can run your motor on taller transom boats without having to cut down the transom. $150.00. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| © 2000, 2002, 2005, 2007 phpBB Group • http://www.phpbb.com | |