| HPBCANADA.COM https://hpbc.ca/ |
|
| gm parts https://hpbc.ca/viewtopic.php?f=37&t=952 |
Page 1 of 2 |
| Author: | SHIVERS [ February 14th, 2013, 12:50 am ] |
| Post subject: | gm parts |
anybody here got a good price from gm or other source! I need a front wheel hub[bearing] for my dually,best I can find for top quality is about $500.00 tax in! 95/3500 silverado 4x4 6.5/ dual rears[it makes a difference] non duals is $200tax in! |
|
| Author: | Dougw [ February 14th, 2013, 8:50 am ] |
| Post subject: | Re: gm parts |
If you have the GM part # and google it - I have found a huge price variances on line for the same part. Sometimes way cheaper to buy in the US and pay the $ 20 for shipping. Maybe try a wrecker....might get a whole rear end for $500 or less |
|
| Author: | SHIVERS [ February 14th, 2013, 9:35 am ] |
| Post subject: | Re: gm parts |
front right wheel hub -P/n19235949- I tried and got nothing from the internet, or jobbers with that number, lists a timken 80300 but thats for a single wheel truck I have one, it doesn't fit! the rotor goes on the back of my hub which is different than anything else! my usual supplier is bringin in a couple today and I'll se what fits one is 175  and the other is 450  I kind of know which one will fit! |
|
| Author: | Rowboat [ February 14th, 2013, 9:50 am ] |
| Post subject: | Re: gm parts |
CAll Dave S. at Napa, Scarborough. 416-752-8574 Tell him you're on the site and you know Rowboat. |
|
| Author: | SHIVERS [ February 14th, 2013, 11:55 pm ] |
| Post subject: | Re: gm parts |
Rowboat wrote: CAll Dave S. at Napa, Scarborough. 416-752-8574 Tell him you're on the site and you know Rowboat. thanks for the help! |
|
| Author: | STV builder [ February 15th, 2013, 12:43 am ] |
| Post subject: | Re: gm parts |
rockauto.com i buy numerous parts for my ever breaking down wonderful Cadillacs from there cheap, great parts and fast shipping I had a AC delco wheel bearing to my door with in 2 days of order even tho it was out of the country, and i paid about half price |
|
| Author: | STV builder [ February 15th, 2013, 12:51 am ] |
| Post subject: | Re: gm parts |
scrool down a bit and ull see it http://www.rockauto.com/catalog/raframe ... ttype=1636 |
|
| Author: | SHIVERS [ February 15th, 2013, 10:02 am ] |
| Post subject: | Re: gm parts |
STV builder wrote: scrool down a bit and ull see it http://www.rockauto.com/catalog/raframe ... ttype=1636 I checked it out, thats with the rotor too $500/ you had to buy them that way for the first 5 years of production even if you just needed a rotor or speed sensor! I paid about $700 when I needed a new rotor years ago!now there $70! I picked up a bearing yesterday and that part of the truck is done! I got a great quote from Rowboats friend, but it was 160 miles round trip to get it! I found a supplier of a second line bearing that comes with the speed sensor for $200  because I do the labour myself I thought it would be OK if it doesn't last 18yrs like the first one!just a word of caution to others, some of the second line bearings I inspected at suppliers before purchasing didn't even have the speed sensor holes machined during manufacturing [make sure you know what your buying if doing it online]! I would have been pissed if I waited 5days for shipping and received one of those! Today I get to fight with 4new rear boots and some 100lb. brake drums for the next stage of Prev-maintenance! this is the part of winter I like getting the vehicles up to snuff,so I can spend my summer playing! thanks to all for the help! |
|
| Author: | STV builder [ February 15th, 2013, 6:21 pm ] |
| Post subject: | Re: gm parts |
Sounds like you got a good buy then! |
|
| Author: | CVX20 [ February 15th, 2013, 7:31 pm ] |
| Post subject: | Re: gm parts |
Don you need to check with your buddy across the street.He's got a lot of contacts. |
|
| Page 1 of 2 | All times are UTC - 5 hours [ DST ] |
| © 2000, 2002, 2005, 2007 phpBB Group • http://www.phpbb.com | |