| HPBCANADA.COM https://hpbc.ca/ |
|
| 1990'S MERCURY SHORT SHAFT 40-60 HP 822864A1 SWIVEL BRACKET https://hpbc.ca/viewtopic.php?f=37&t=4357 |
Page 1 of 1 |
| Author: | Hounddog [ December 10th, 2020, 12:00 am ] |
| Post subject: | 1990'S MERCURY SHORT SHAFT 40-60 HP 822864A1 SWIVEL BRACKET |
I am looking for one of these....even the complete motor. Here is one: https://storage.bhs.cloud.ovh.net/v1/AU ... 58083b.jpg The problem with running a T750 SHORT SHAFT Mercury is the factory power trim. The only factory late model style trim bracket were on these models...40 hp 4 cylinder. |
|
| Author: | Hounddog [ December 10th, 2020, 11:35 am ] |
| Post subject: | Re: 1990'S MERCURY SHORT SHAFT 40-60 HP 822864A1 SWIVEL BRAC |
EMAIL: The 4 cylinder mercury would not be as good as the 3 cylinder 60 hp. That 15 inch mid is the same mid used on the 60 hp. The 60 has the 60 base plate to mount the triple. There are several versions of the 49 cubic inch triple. Prior to 1975 and the OMC Nitro case, the mercury was very competitive in FE. After the appearance of the Delta hull you didn’t see any twin carb mercury’s in FE only the 650XS. The XS was not an easy model to maintain and keep running so many lake runners ran twin carb models on their delta. It was said that those early twin carb triples ran low 60 mph on delta hulls.....hard to prove without GPS. I do think it is possible, but, you definitely need the 150 compression high dome pistons in the motor and a good exhaust tuner. |
|
| Author: | Streamin [ December 12th, 2020, 9:18 am ] |
| Post subject: | Re: 1990'S MERCURY SHORT SHAFT 40-60 HP 822864A1 SWIVEL BRAC |
Steve Humphreys 1990 voodoo runs 62-63 with a 1990 mercury 60hp twin carb with 20 mini chopper. Very light boat. |
|
| Author: | Streamin [ December 12th, 2020, 11:40 am ] |
| Post subject: | Re: 1990'S MERCURY SHORT SHAFT 40-60 HP 822864A1 SWIVEL BRAC |
Dave Elsey has 15" mercury 3banger mids |
|
| Author: | Hounddog [ December 12th, 2020, 1:03 pm ] |
| Post subject: | Re: 1990'S MERCURY SHORT SHAFT 40-60 HP 822864A1 SWIVEL BRAC |
Streamin wrote: Dave Elsey has 15" mercury 3banger mids INTERESTING TIMING! Dave’s emails: On Thursday, December 10, 2020, Dave Elsey wrote: I'm not parting out. I want to sell everything at once. No time yet to itemize. $2000.00 seems fair to me. I believe there's three fully assembled ready to go 15" lower units with both [1.6, 1.8]gear ratios, and enough parts to build at least one more engine complete and 1 complete motor. I know there's a control box cables, a very custom hydraulic side steering setup and some power trim stuff. There's even a complete long shaft with power trim that had blown a piston included. Might even be a new decal set. Capt Dave |
|
| Author: | mattmak [ December 12th, 2020, 7:26 pm ] |
| Post subject: | Re: 1990'S MERCURY SHORT SHAFT 40-60 HP 822864A1 SWIVEL BRAC |
Streamin is spreading LIES! well.. kinda. I think maybe 61mph for that awesome merc60 Voodoo.. unless Humphrey is finding speed somehow with magic tune, or less double cheeseburgers... |
|
| Author: | LittleCharger [ December 13th, 2020, 9:35 am ] |
| Post subject: | Re: 1990'S MERCURY SHORT SHAFT 40-60 HP 822864A1 SWIVEL BRAC |
mattmak wrote: Streamin is spreading LIES! well.. kinda. I think maybe 61mph for that awesome merc60 Voodoo.. unless Humphrey is finding speed somehow with magic tune, or less double cheeseburgers... Too fast for us ! What does that voodoo weigh ? |
|
| Author: | Streamin [ December 13th, 2020, 3:44 pm ] |
| Post subject: | Re: 1990'S MERCURY SHORT SHAFT 40-60 HP 822864A1 SWIVEL BRAC |
Stringer boat. Balsa dash and transom. Weighs about 180 i believe. Topgun would know...his old boat |
|
| Author: | Northbase [ December 13th, 2020, 7:52 pm ] |
| Post subject: | Re: 1990'S MERCURY SHORT SHAFT 40-60 HP 822864A1 SWIVEL BRAC |
Streamin wrote: Stringer boat. Balsa dash and transom. Weighs about 180 i believe. Topgun would know...his old boat Is it the twin to your old boat? |
|
| Author: | Streamin [ December 14th, 2020, 10:07 am ] |
| Post subject: | Re: 1990'S MERCURY SHORT SHAFT 40-60 HP 822864A1 SWIVEL BRAC |
The boat we'r talking about is an old style Greg. He does also have a new 2020 voodoo as well. I miss my white boat |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| © 2000, 2002, 2005, 2007 phpBB Group • http://www.phpbb.com | |
