| HPBCANADA.COM https://hpbc.ca/ |
|
| Gaskets https://hpbc.ca/viewtopic.php?f=37&t=1769 |
Page 1 of 1 |
| Author: | johnny rotten [ November 12th, 2013, 10:42 am ] |
| Post subject: | Gaskets |
Could I get some advise on head gaskets for an omc 49. Just wondering if oem or aftermarket are the way to go and where to go for the best price. Sounds like I'll need a few spare. Thanks - John |
|
| Author: | Hevi Kevi [ November 12th, 2013, 5:33 pm ] |
| Post subject: | Re: Gaskets |
Paul likely has some at Top Gun for a good price. Doesn't really matter OEM or aftermarket. Just make sure when your head is cut for the compression you want, keep using the same brand of gasket as different brands can be different thicknesses. I think a Sierra is about .010" thicker than OEM. If you had your head cut close to 160 with a Sierra and then put an OEM gasket on, it might put you over. Kevin |
|
| Author: | johnny rotten [ November 12th, 2013, 5:38 pm ] |
| Post subject: | Re: Gaskets |
Good advice. Thanks Kevin |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| © 2000, 2002, 2005, 2007 phpBB Group • http://www.phpbb.com | |