| HPBCANADA.COM https://hpbc.ca/ |
|
| t-750 Prop https://hpbc.ca/viewtopic.php?f=36&t=311 |
Page 1 of 2 |
| Author: | jake@elsey.ca [ June 11th, 2012, 11:46 pm ] |
| Post subject: | t-750 Prop |
Lookin for a prop for a 13ft delta/60hp 2cyl. Boat will be light if that helps with selection. |
|
| Author: | SHIVERS [ June 12th, 2012, 6:26 am ] |
| Post subject: | Re: t-750 Prop |
what is your gear ratio? |
|
| Author: | LittleCharger [ June 12th, 2012, 7:04 am ] |
| Post subject: | Re: t-750 Prop |
SHIVERS wrote: what is your gear ratio? 12-29 (2.42) same ratio as the 70hp but the 60hp case he has is a nitro case. Will be looking for something in the 22-23 pitch area. |
|
| Author: | David [ June 12th, 2012, 9:01 pm ] |
| Post subject: | Re: t-750 Prop |
I have a DAH 23 SRX that I don't need anymore. Would the diameter be too big for your needs? The prop is at Walk With Max. |
|
| Author: | SHIVERS [ June 12th, 2012, 9:56 pm ] |
| Post subject: | Re: t-750 Prop |
I have a chopper that is 11x19! your dad had a look at it when he was over here! won't be enough prop for you! I thought you might have a shorter gear! I tried it on my voodoo and it was only good for checking if the tach needle was well secured! a 2/1 or less ratio prop! It's not for sale ,but if somebody wants to try or use it, no problem! |
|
| Author: | Andrew4ce [ June 13th, 2012, 8:16 am ] |
| Post subject: | Re: t-750 Prop |
SHIVERS wrote: I have a chopper that is 11x19! your dad had a look at it when he was over here! won't be enough prop for you! I thought you might have a shorter gear! I tried it on my voodoo and it was only good for checking if the tach needle was well secured! a 2/1 or less ratio prop! It's not for sale ,but if somebody wants to try or use it, no problem! I'd love to try this if it is through hub exhaust. Hope to have boat at GH. |
|
| Author: | Hounddog [ June 13th, 2012, 8:29 am ] |
| Post subject: | Re: t-750 Prop |
SHIVERS wrote: I have a chopper that is 11x19! your dad had a look at it when he was over here! won't be enough prop for you! I thought you might have a shorter gear! I tried it on my voodoo and it was only good for checking if the tach needle was well secured! a 2/1 or less ratio prop! It's not for sale ,but if somebody wants to try or use it, no problem! That 11 x 19 will run good on a Yamaha or Tohatsu Thunder Cat or T750 T boat...especially a DELTA. Those motors are all about a 1:84 ratio. OR DAVE ELSEYS T750 Mercury with a 1:64 or 1:84 foot. You should be able to sell the prop at Gravenhurst if you want to. We have many T750 wet boats with many different motors. We just need to get them out. |
|
| Author: | SHIVERS [ June 13th, 2012, 10:05 pm ] |
| Post subject: | Re: t-750 Prop |
daveee already had it in his hands and I had to pry it loose! I will have the prop at gh! Elsey's have first shot at using it and then whoever wants to try it! but it's not for sale, it belonged to a late friend,who owned a prop shop! |
|
| Author: | jake@elsey.ca [ June 13th, 2012, 10:07 pm ] |
| Post subject: | Re: t-750 Prop |
so then it looks like i'm looking for a 11->12 diameter to a 20->23 pitch! (Unfortunately the boat isn't floating yet... i have been learning that props are prized. Thanks Shivers!) |
|
| Author: | LittleCharger [ June 13th, 2012, 10:28 pm ] |
| Post subject: | Re: t-750 Prop |
A merc lab cleaver 22 pitch would be the perfect prop...I've seen one of those some where, I'll mention it to Steph next time I see her.  You can try the smaller pitches but if you going to run the 60 then I'd be looking for something in the 22 to 23 range, basically the same prop from the stinger and 56er is what you are looking for. |
|
| Page 1 of 2 | All times are UTC - 5 hours [ DST ] |
| © 2000, 2002, 2005, 2007 phpBB Group • http://www.phpbb.com | |