Hi Don,It's Thom not Todd. I'm hec2buck. Anyhow, yes please ask Craig if he still has a 25 or 27". Thanks Don
| HPBCANADA.COM https://hpbc.ca/ |
|
| OMC Cleaver https://hpbc.ca/viewtopic.php?f=36&t=2531 |
Page 1 of 2 |
| Author: | hec2buck [ October 16th, 2014, 2:09 pm ] |
| Post subject: | OMC Cleaver |
Looking for 12.5"x25" (3) blade cleaver used or even damaged, with 13 tooth spline for OMC |
|
| Author: | Hounddog [ October 16th, 2014, 6:22 pm ] |
| Post subject: | Re: OMC Cleaver |
Todd I loaned one to Mr. Fraser two years ago. He may still have it. Maybe I got it back? If not he should have a 27 pitch that you could rework. How soon do you need one? There were several of them around this area and we should be able to locate one for you. Top Gun may have one. He will post if he does. I will follow up with Fraser. Don |
|
| Author: | hec2buck [ October 20th, 2014, 1:32 pm ] |
| Post subject: | Re: OMC Cleaver |
| Hi Don, It's Thom not Todd. I'm hec2buck. Anyhow, yes please ask Craig if he still has a 25 or 27". Thanks Don |
|
| Author: | Hounddog [ October 24th, 2014, 11:02 pm ] |
| Post subject: | Re: OMC Cleaver |
Thom here is one on another site. http://www.boatracingfacts.com/forums/s ... SE-Cleaver |
|
| Author: | hec2buck [ October 30th, 2014, 2:48 pm ] |
| Post subject: | Re: OMC Cleaver |
| Hi Don, I saw that same prop for an old SE boat as well. I made an offer, but have not heard back. Any luck with Craig Fraser? |
|
| Author: | Hounddog [ October 30th, 2014, 3:44 pm ] |
| Post subject: | Re: OMC Cleaver |
hec2buck wrote: :) Hi Don, I saw that same prop for an old SE boat as well. I made an offer, but have not heard back. Any luck with Craig Fraser? Craig is keeping his and so is Erik. |
|
| Author: | sheuninck [ October 30th, 2014, 6:40 pm ] |
| Post subject: | Re: OMC Cleaver |
Are you willing to trade 12.75 x 25 for a ~12.5 x 22 Titus like our SLT prop? |
|
| Author: | hec2buck [ November 4th, 2014, 11:15 am ] |
| Post subject: | Re: OMC Cleaver |
 Hi Steve,I don't have a spare Titus 12.5x22, but I do have a DAH 12 1/4"x 22" I can part with. We can work it just like the Titus if you wish. Thanks, Thom |
|
| Author: | sheuninck [ November 6th, 2014, 11:10 pm ] |
| Post subject: | Re: OMC Cleaver |
OK Thom, how do want to proceed. |
|
| Author: | hec2buck [ November 10th, 2014, 12:18 pm ] |
| Post subject: | Re: OMC Cleaver |
Hi Steve,  Ship your prop to us via USPS, and we will begin work on our 12 1/4"x22" DAH to turn it into a Titus style design. Give us some time to do this in that we will be shut down for some moving of equipment into our building next door. You can get our address at www.hydromotive.com. Steve, you can trust we will do this. We will ship our prop to you when finished, via USPS. How's John? Thanks Steve, Thom |
|
| Page 1 of 2 | All times are UTC - 5 hours [ DST ] |
| © 2000, 2002, 2005, 2007 phpBB Group • http://www.phpbb.com | |