HPBCANADA.COM
https://hpbc.ca/

2.6 Yamaha airbox
https://hpbc.ca/viewtopic.php?f=29&t=1633		 Page 1 of 1
Author:  beavertonae-21 [ September 13th, 2013, 11:20 pm ]
Post subject:  2.6 Yamaha airbox
I have a drilled out airbox, opened up nat the back. Ray Nudacker suggested doing this to get the same gain as removing the airbox (slight) without the added noise. you do get some mess under the hood, noy much , but I noticed it on the side of my midsection coming from the pan. I would trade straight up for a stock airbox if someone is interested.
text me at 416 526-9889
Steve
Author:  DoktorC [ September 13th, 2013, 11:33 pm ]
Post subject:  Re: 2.6 Yamaha airbox
I've got lots of stock ones...you can have one..
Author:  BoomerMuskoka [ September 14th, 2013, 2:34 pm ]
Post subject:  Re: 2.6 Yamaha airbox
beavertonae-21 wrote:
I have a drilled out airbox, opened up nat the back. Ray Nudacker suggested doing this to get the same gain as removing the airbox (slight) without the added noise. you do get some mess under the hood, noy much , but I noticed it on the side of my midsection coming from the pan. I would trade straight up for a stock airbox if someone is interested.
text me at 416 526-9889
Steve


i run the stock air box and i have the same oil line down the side of my mid.. i think its from the oil tank vent. not sure yet.. I always assume the worst so my first thought when i saw oil on my mid was fml crank seal. :lol:
Author:  beavertonae-21 [ September 15th, 2013, 12:11 am ]
Post subject:  Re: 2.6 Yamaha airbox
DoktorC wrote:
I've got lots of stock ones...you can have one..
thanks Rick, I will take you up on that, I will do some back to back tests then.

thanks!

Steve
Page 1 of 1 All times are UTC - 5 hours [ DST ]
© 2000, 2002, 2005, 2007 phpBB Group • http://www.phpbb.com