| HPBCANADA.COM https://hpbc.ca/ |
|
| EXCELLENT condition OMC 49 cubic inch power head parts https://hpbc.ca/viewtopic.php?f=28&t=3744 |
Page 1 of 1 |
| Author: | Hounddog [ August 10th, 2017, 10:24 am ] |
| Post subject: | EXCELLENT condition OMC 49 cubic inch power head parts |
Most of this stuff I have had since early 1990's. It has been in boxes in my garage since then. - cast crank looks NEW......$225.00 - 49 block perfect standard bore.....$100.00 - standard bore pistons and rods for block above $150.00 - complete ignition system 1974....like new...likely NOS......$200.00 These are some parts I got this spring - 1975...75 hp stinger carbs...$75.00 - 75 hp block, crank .....$150.00 My 49 OMC project.....why I got these parts out of storage; I want to try a 2 cylinder OMC nitro case on a 49 OMC. I was able to get a 15 inch drive shaft from Kevi and I have a spare 2 cylinder gear case. The 2 cylinder nitro is the same high ratio as the big foot 3 cylinder gear case. The problem with the high ratio gears in a nitro is they are much weaker because of the ratio and the assembly is different to the 3 cylinder nitro.. They do not last with a strong 49 or any 56 power head. I was able to purchase a very nice 65 hp OMC powerhead. It is a complete bolt on runner so I do not need the parts listed above. The T750 boys are getting 65 to 69 hp out of their 2 cylinders, so I think the 2 cylinder lower unit will last with this power head. I could cryo the gears and prop shaft to make them stronger. Maybe? |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| © 2000, 2002, 2005, 2007 phpBB Group • http://www.phpbb.com | |