clickable pics of the above motor..
| HPBCANADA.COM https://hpbc.ca/ |
|
| Johnson 75hp shorty https://hpbc.ca/viewtopic.php?f=27&t=4263 |
Page 1 of 2 |
| Author: | Streamin [ January 5th, 2020, 5:33 pm ] |
| Post subject: | Johnson 75hp shorty |
Motors an '88 or '89 cant remember. 49ci 75hp. Big carbs. Reeds. Fresh grey metalic paint and new decals. 15" mid no trim. NO LOWER!!! Motor is an Evinrude Sprint originally. $1200 705 928 8910 |
|
| Author: | mattmak [ January 5th, 2020, 9:43 pm ] |
| Post subject: | Re: Johnson 75hp shorty |
clickable pics of the above motor..
|
|
| Author: | Hounddog [ January 5th, 2020, 10:35 pm ] |
| Post subject: | Re: Johnson 75hp shorty |
Twin cylinder nitro cases are easy to find in Ontario. You can weld up and make a 4 spline drive shaft. Original triple gear sets are costly. But, two offered below are lower than normal and one is open to offers. https://www.ebay.ca/sch/i.html?_from=R4 ... C&_sacat=0 |
|
| Author: | Streamin [ January 6th, 2020, 8:12 pm ] |
| Post subject: | Re: Johnson 75hp shorty |
Im firm on this price because I need to get the $$ I have into it back out of it. BUT I have lots of parts that can be added to sweeten the deal. Lets work something out. I need the motor stand back soon lol |
|
| Author: | Streamin [ January 12th, 2020, 2:50 pm ] |
| Post subject: | Re: Johnson 75hp shorty |
Now a set of wing plates included in the price!!!!! |
|
| Author: | J.Kimmerly [ January 13th, 2020, 8:09 pm ] |
| Post subject: | Re: Johnson 75hp shorty |
For the gear case, what years fit this engine? |
|
| Author: | mattmak [ January 13th, 2020, 10:58 pm ] |
| Post subject: | Re: Johnson 75hp shorty |
The year range is approx 1973 to 1991.. Any short shaft, 4 spline, push/pull rod gear shifter.. Ranges from a 1973 short and fat 15inch 2.42 gears, to a 1990ish SST-60 gearbox.. With the 1975+ Nitro 75hp/FE/Sprint box with 1.87 gears kinda in between. I think. |
|
| Author: | Streamin [ January 14th, 2020, 5:45 pm ] |
| Post subject: | Re: Johnson 75hp shorty |
Hounddog has put together a whole thread on fitting 49ci motors with nitro lowers at very low costs. Very interesting. Im almost tempted to keep this motor and run a 2cyl lower on in but then Id need another boat and that wont happen so its gotta go. Still Forsale! |
|
| Author: | Hounddog [ January 30th, 2020, 11:44 am ] |
| Post subject: | Re: Johnson 75hp shorty |
Streamin wrote: Motors an '88 or '89 cant remember. 49ci 75hp. Big carbs. Reeds. Fresh grey metalic paint and new decals. 15" mid no trim. NO LOWER!!! Motor is an Evinrude Sprint originally. $1200 705 928 8910 You need to check the parts book to confirm the block assembly is the same for this motor as the 60 hp version. The 60 hp would have the small carbs. IF SO.... Legal motor in 2020 T750. NOT LEGAL AS OF Feb. 12, 2020 |
|
| Author: | Streamin [ February 8th, 2020, 2:26 pm ] |
| Post subject: | Re: Johnson 75hp shorty |
I can add a second 49ci powerhead to this deal. Pm me or call me 705 928 8910. Lets make a deal I need money . |
|
| Page 1 of 2 | All times are UTC - 5 hours [ DST ] |
| © 2000, 2002, 2005, 2007 phpBB Group • http://www.phpbb.com | |