| HPBCANADA.COM https://hpbc.ca/ |
|
| Allison GT20 https://hpbc.ca/viewtopic.php?f=26&t=2895 |
Page 1 of 2 |
| Author: | Hevi Kevi [ June 13th, 2015, 9:49 pm ] |
| Post subject: | Allison GT20 |
Never heard of one of these. Just googling it though, seems to be a few out there. Thought it was worth sharing http://www.kijiji.ca/v-powerboat-motorb ... nFlag=true |
|
| Author: | idvette [ June 14th, 2015, 4:08 pm ] |
| Post subject: | Re: Allison GT20 |
Pretty sure these were the hulls that "inspired" the V-21..... But I could be wrong, it's happened twice before.... |
|
| Author: | Northbase [ June 14th, 2015, 4:47 pm ] |
| Post subject: | Re: Allison GT20 |
Hang a pair of 12" motors on it and go play!! |
|
| Author: | RBT [ June 14th, 2015, 7:00 pm ] |
| Post subject: | Re: Allison GT20 |
Ya it inspired the v-21 Different length, width, dead rise, transom angle, entry angle, number of strakes, pad width, and the v21 is a muti degree vee. But as the Internet would have everyone believe they are the same. |
|
| Author: | DoktorC [ June 14th, 2015, 7:54 pm ] |
| Post subject: | Re: Allison GT20 |
RBT wrote: Ya it inspired the v-21 Different length, width, dead rise, transom angle, entry angle, number of strakes, pad width, and the v21 is a muti degree vee. But as the Internet would have everyone believe they are the same. Whatever dude...same boat...just a lot slower 
|
|
| Author: | Northbase [ June 14th, 2015, 8:38 pm ] |
| Post subject: | Re: Allison GT20 |
DoktorC wrote: RBT wrote: Ya it inspired the v-21 Different length, width, dead rise, transom angle, entry angle, number of strakes, pad width, and the v21 is a muti degree vee. But as the Internet would have everyone believe they are the same. Whatever dude...same boat...just a lot slower I love such witty banter! 
|
|
| Author: | RBT [ June 14th, 2015, 10:24 pm ] |
| Post subject: | Re: Allison GT20 |
Kinda like having an Omc with a merc gearcase painted SRV grey |
|
| Author: | idvette [ June 15th, 2015, 4:11 pm ] |
| Post subject: | Re: Allison GT20 |
lol.... so, was I/the internet wrong????? or..... |
|
| Author: | DoktorC [ June 15th, 2015, 4:53 pm ] |
| Post subject: | Re: Allison GT20 |
idvette wrote: lol.... so, was I/the internet wrong????? or..... There is a clear resemblance between the two but like RBT says totally different hulls...and that is shown by the fact the V21 is a helluva lot faster than the GT20. Primer grey...still don't understand the choice Rob....but I've come to terms with it
|
|
| Author: | Bwc racing [ June 20th, 2015, 6:08 pm ] |
| Post subject: | Re: Allison GT20 |
I looked at the boat. It had a floor put in but there is no core in the center.. The transom is cracked at the bottom. With black water dripping out. So needs a total resto. I'm still thinking of taking it on but can't put a value on the boat. What's fair for a hull that is in very poor shape. The trailer is the only value I see. I have rebuilt boats before so I know this is a huge project. What's it worth? |
|
| Page 1 of 2 | All times are UTC - 5 hours [ DST ] |
| © 2000, 2002, 2005, 2007 phpBB Group • http://www.phpbb.com | |