HPBCANADA.COM
https://hpbc.ca/

88 mustang lx drag car
https://hpbc.ca/viewtopic.php?f=25&t=2577
Page 1 of 3

Author:  Carson [ November 10th, 2014, 11:53 pm ]
Post subject:  88 mustang lx drag car

Well heres a up date on the car, decided to made a new thread for it. Started off as a fairly clean 88 lx, plans for now are street/ strip car for now so i can still have some fun. 331 stroker, t-5 with some liberty gear goodies, 28x10 drag slicks. Floor on driver side floor pan by your feet is rotten. Rest of floor is ok but getting soft. Plan is to cut out front floor and run an sfi spec 25.3 cage design in the floor area for now, and add onto it later when i make the car quicker. Long term plan is single 88mm turbo 351w.
How the car started, stock mustang, put in a tubular drag race front k-frame. Stock k frames about 250 lbs, new ones around 15 lbs.
Image

As of right now its choppy choppy time! Cutting out the stock wheel tubs and preping for the mini tubs. Will fit a 14" wide tire with out back halfing the car, just need to trim the rear frame.
Image
Image
Image
Image

Stay tuned for more! Will update as progress goes on

Author:  1 I Bandit [ November 11th, 2014, 11:54 pm ]
Post subject:  Re: 88 mustang lx drag car

looks like you need some wheel tubs :) let me know.

Author:  Carson [ November 12th, 2014, 2:26 am ]
Post subject:  Re: 88 mustang lx drag car

Yea lookin for a mini tub kit

Author:  1 I Bandit [ November 12th, 2014, 2:53 pm ]
Post subject:  Re: 88 mustang lx drag car

Carson wrote:
Yea lookin for a mini tub kit

If you can make a template or get a radius and a width I can make them.

Author:  Jeff Yammer [ January 24th, 2015, 11:29 am ]
Post subject:  Re: 88 mustang lx drag car

Let's see some updates.

Author:  Carson [ January 24th, 2015, 7:34 pm ]
Post subject:  Re: 88 mustang lx drag car

Update, on a car trailer with a tarp over it in the driveway, currently doing a tranny swap on the g/f's volkswagen :s but ive got my coil overs now, just need a few parts from team z and the rear end can start to take shape!

Author:  Carson [ January 24th, 2015, 11:05 pm ]
Post subject:  Re: 88 mustang lx drag car

On a side update engine plans have changed slightly, ive been drawn to the dark side, the LSX dark side. Im a huge ford fan but the bang for you buck on the ls motor vrs the ford its hard to say no lol

Author:  Jeff Yammer [ January 25th, 2015, 11:07 am ]
Post subject:  Re: 88 mustang lx drag car

What parts do you need still

Author:  Carson [ January 25th, 2015, 4:14 pm ]
Post subject:  Re: 88 mustang lx drag car

Rear mini tub kit/ coil over mounts from team z, then i can have the back on springs again, anti roll bar, front coil overs ( not completely nessasary yet) and the start my 25.3 style cage, going to do the floor/ main hoop and door bars to the 25.3 spec, that way when i wanna get going faster i can just add to the cage instead of start over

Author:  Carson [ January 25th, 2015, 9:37 pm ]
Post subject:  Re: 88 mustang lx drag car

Some more parts arived today, rear coil overs!
Image

Page 1 of 3 All times are UTC - 5 hours [ DST ]
© 2000, 2002, 2005, 2007 phpBB Group • http://www.phpbb.com