lake motor
dave bush pistons and sleeves
reliable lake motor
| HPBCANADA.COM https://hpbc.ca/ |
|
| 420 hp motor https://hpbc.ca/viewtopic.php?f=20&t=3277 |
Page 1 of 2 |
| Author: | jimmy911 [ March 7th, 2016, 4:57 pm ] |
| Post subject: | 420 hp motor |
lake motor dave bush pistons and sleeves reliable lake motor
|
|
| Author: | OMCFORME [ March 12th, 2016, 11:17 am ] |
| Post subject: | Re: 420 hp motor |
Hey Jim, that's awesome, tell us more.....what ECU...is it Dave's 3.0L "lake" sleeves or the 3.3 setup ? What heads ? Matt |
|
| Author: | BoomerMuskoka [ March 12th, 2016, 7:57 pm ] |
| Post subject: | Re: 420 hp motor |
whats it going on? |
|
| Author: | jimmy911 [ March 12th, 2016, 9:13 pm ] |
| Post subject: | Re: 420 hp motor |
Motor is a 3.3 dave bush piston and sleeve kit ported, rod slots done, etec front half stock reed cages with boysens. injection done in the front half,compresion on the motor is 120 motor has reved to 9200 so far. induction ignition Adapter plate is modified Motor is going on a Quatershot T3R with a 16 inch mid and a omc lower with 1:75 gear ratio boat is a little heavy at 500 lbs Should be fun for a toy Working on bumping compression to 180 for av gas, it should raise the torque and horse power Motor is still be tested on the dyno Dave is an awesome guy to work with i am very pleased to work with him and his friends |
|
| Author: | Hevi Kevi [ March 12th, 2016, 10:00 pm ] |
| Post subject: | Re: 420 hp motor |
Um, ok... That's going to be insane. This is one boat I want to see in action! |
|
| Author: | David [ March 13th, 2016, 10:37 am ] |
| Post subject: | Re: 420 hp motor |
Why the OMC lower? |
|
| Author: | jimmy911 [ March 13th, 2016, 10:55 am ] |
| Post subject: | Re: 420 hp motor |
The case is faster and smaller then the mercs |
|
| Author: | RBT [ March 13th, 2016, 11:02 am ] |
| Post subject: | Re: 420 hp motor |
Awesome, can you come play with us at our races? |
|
| Author: | jimmy911 [ March 13th, 2016, 6:34 pm ] |
| Post subject: | Re: 420 hp motor |
i would like to have Acies powerhead for the drags but mine will do for now I would like to try and come down and play work may get in the way What do you have on the go Rob ? 
|
|
| Author: | jimmy911 [ April 2nd, 2016, 11:42 pm ] |
| Post subject: | Re: 420 hp motor |
Dave is working on head for the motor, it should run about 135 to 140 on 1 set of chambers. The second set of head chambers will produce about 175 to 180 with the ability to run on av gas. With the increase in compression we are hopping to make between 440 and 450 Hp I am in the process of building an open deck 3.3. with the hope of making 500 hp Dave is giving great advice Hope to have this motor ready for the fall, the work that Dave does always evolves into more hp he is in a league of his own. I hope i can keep up will post some more pics soon and some dyno numbers |
|
| Page 1 of 2 | All times are UTC - 5 hours [ DST ] |
| © 2000, 2002, 2005, 2007 phpBB Group • http://www.phpbb.com | |