Twin Talon 22 Project.

DoktorC · **Posted:** March 24th, 2015, 2:09 pm

If we named the site after James' boats we'd have to change it every three weeks...

beavertonae-21 · **Posted:** March 24th, 2015, 2:48 pm

wetsidedown · **Joined:** June 27th, 2012, 9:18 pm **Posts:** 240

RBT is buying 300XS's and I'M in???

OneCycle · **Posted:** April 16th, 2015, 9:40 am

installed the new helm and some new Bump rail... going up the back is going to be a hair tough. does anyone have experience doing tough corners with this type rail ?

DoktorC · **Posted:** April 16th, 2015, 10:03 am

Rub rail??? Yes..

OneCycle · **Posted:** April 16th, 2015, 10:29 am

DoktorC wrote:

Rub rail??? Yes..

so what tools do you use ? and do you apply heat?

DoktorC · **Posted:** April 16th, 2015, 10:40 am

No heat...get a piece to practice with. There's a good chance you'll crack it or at least the coating on it...just so you're prepared.

you're gonna need a dremel or saw to notch the lower edge to allow it to bend. Then you need to practice bending that compound corner...rubber hammer will help. Use the original piece to copy the cuts for the relief.

OneCycle · **Posted:** April 16th, 2015, 10:53 am

cool cool.. i have lots to practice on. thanks.

beavertonae-21 · **Posted:** April 16th, 2015, 12:33 pm

Boat is looking really good James.

MOTOboat · **Joined:** April 25th, 2012, 1:37 pm **Posts:** 167

i got mine new rail around the corner. The first one is I'd say 90% right the second one I did I got it 100%.

Figures I should have done James's first

HPBCANADA.COM

Twin Talon 22 Project.

Who is online