HPBCANADA.COM
https://hpbc.ca/

T BOAT UPDATES< NEWS> THOUGHTS
https://hpbc.ca/viewtopic.php?f=2&t=4169
Page 1 of 2

Author:  Hounddog [ May 19th, 2019, 9:33 am ]
Post subject:  T BOAT UPDATES< NEWS> THOUGHTS

SST 60 Cowls.....Dan was taking orders for the cowl.
Decal kits for JOHNSON SST 60 are on ebay $65.00 Canadian
https://www.ebay.com/itm/Johnson-SST-60 ... 2576985182

PISTONS for the 56 oval port......must have rectangular rings
MAKE SURE you use correct piston and rings
The Replaces OEM 0778476.
Evinrude Johnson OMC Piston & rng Kit, std 5006694 is equivalent to parts:
DOUBLE CHECK TO BE SURE
3172PS Wiesco
3072PS Wiesco
3022PS Wiesco
778476 Evinrude Johnson OMC BRP
9-53432 Mallory Marine
23740 GLM correct piston and rings

NITRO cases
- gears are costly....about $1000.00 Canadian for the 3
- new drive shafts are costly...used are rare to find
- carriers are available.....better buy is getting a 2 cylinder nitro and using the case, carrier and prop shaft from it

NEW CRITCHFIELD BOATS are available from TOP GUN and new Deltas from Andrew are in the works
I believe the one 13 Murphy is still available.

USED T's......there are 3 current on KIJIJI
- FE DELTA
https://www.kijiji.ca/v-powerboat-motor ... nFlag=true
Needs a lot of work!

- Marty open deck Critchfield
https://www.kijiji.ca/v-powerboat-motor ... nFlag=true
I think it is a 49 and was one of Dan's boats......not a light hull...has had a lot of money spend on it.

-Voo-Doo
https://www.kijiji.ca/v-powerboat-motor ... nFlag=true

This is a light boat.....Mark on this site has just finished restoring a VooDoo 30 hp yamaha for his son.
This Voo Doo is costly, but, there is value when you consider the motor and prop. It does not appear to need work. THAT IS IMPORTANT!
IF? you wanted a boat for your son or daughter , you could save the motor for later and switch the motor for now.
EXAMPLE: https://www.kijiji.ca/v-powerboat-motor ... nFlag=true
You only need steering bars, and adjust the tach to run the OMC twin......the electrics, the cables and the PROP work as does the set up. Taking time and money into consideration.....not a bad buy.

T BOAT RACES THIS SUMMER] 5 RACES!!
NO WATERFORD RACE!!!
TORC Race: Gravenhurst, ON...............June 22/23, 2019

SAME WEEKEND....
TORC Race: Erinsville, ON....................July 13/14, 2019
OPBRA Race #1 North Bay,................. July 13-14,2019

OPBRA Race #2 Gravenhurst, ...............August 10-11, 2019

TORC Race: Haliburton, ON ..................August 17/18, 2019

OPBRA Race #3 Peterborough,............. September 14-15, 2019

Author:  13Checkmate [ May 19th, 2019, 1:55 pm ]
Post subject:  Re: T BOAT UPDATES< NEWS> THOUGHTS

The open deck critch in the link does have a 49'er on it. 1985 70hp powerhead, pro 50 yamaha trim, nice 24 raker. We put it together for the current owner. Cut the transom height down for the 15", added the aluminum plates, new allison seats, rewired the boat etc. She is a great driving hull, not a potato chip like our delta but handles chop nicer

Author:  sharpeye Mike [ May 19th, 2019, 7:44 pm ]
Post subject:  Re: T BOAT UPDATES< NEWS> THOUGHTS

There's a Voodoo with a 60 HP Merc around Montreal area. No trailer for $1200 on kijiji.
You'll have to do your home work on this one. It's been for sale for about a month.

Author:  Hounddog [ May 20th, 2019, 6:52 am ]
Post subject:  Re: T BOAT UPDATES< NEWS> THOUGHTS

sharpeye Mike wrote:
There's a Voodoo with a 60 HP Merc around Montreal area. No trailer for $1200 on kijiji.
You'll have to do your home work on this one. It's been for sale for about a month.


https://www.kijiji.ca/v-bateau/ouest-de ... nFlag=true


https://www.kijiji.ca/v-bateau/ouest-de ... nFlag=true

Author:  sharpeye Mike [ May 20th, 2019, 10:09 am ]
Post subject:  Re: T BOAT UPDATES< NEWS> THOUGHTS

Yes those are the ones I've come across. I'm off on the price though.
Thanks Don

Author:  Rowboat [ May 21st, 2019, 11:18 am ]
Post subject:  Re: T BOAT UPDATES< NEWS> THOUGHTS

The decal kits in Hounddog's first post come from Peterborough. Contact him directly.

Author:  Hounddog [ May 21st, 2019, 12:36 pm ]
Post subject:  Re: T BOAT UPDATES< NEWS> THOUGHTS

Rowboat wrote:
The decal kits in Hounddog's first post come from Peterborough. Contact him directly.


YES, and he will make changes to the decals to suit your need. He changed the size [a bit larger] of a horsepower decal on a Mariner decal set for me and am I going to ask him to have the SST 60 decal on this set changed to read SST 45 so I can use the decal set on my T-750 OMC cowl.

https://www.autographicsltd.com/

1-877-430-3616

Author:  Hounddog [ May 21st, 2019, 12:49 pm ]
Post subject:  Re: T BOAT UPDATES< NEWS> THOUGHTS

BIGGER T's.......LOT's of LOW COST V4 and below 150 hp stuff for sale.
- https://www.kijiji.ca/v-powerboat-motor ... nFlag=true

https://www.kijiji.ca/v-other-boat-wate ... nFlag=true

https://www.kijiji.ca/v-powerboat-motor ... nFlag=true

https://www.kijiji.ca/v-powerboat-motor ... nFlag=true

https://www.kijiji.ca/v-powerboat-motor ... nFlag=true

3 cylinder...drag.......https://www.kijiji.ca/v-powerboat-motor ... nFlag=true

Author:  mattmak [ May 21st, 2019, 4:42 pm ]
Post subject:  Re: T BOAT UPDATES< NEWS> THOUGHTS

1998 Checkmate MX-13 with 2002 Yamaha 90hp and Trailer
https://www.kijiji.ca/v-view-details.ht ... 1435616977

Author:  MarkStein [ May 21st, 2019, 8:23 pm ]
Post subject:  Re: T BOAT UPDATES< NEWS> THOUGHTS

mattmak wrote:
1998 Checkmate MX-13 with 2002 Yamaha 90hp and Trailer
https://www.kijiji.ca/v-view-details.ht ... 1435616977


That looks like a tidy little piece. Good value there!

Page 1 of 2 All times are UTC - 5 hours [ DST ]
© 2000, 2002, 2005, 2007 phpBB Group • http://www.phpbb.com