HPBCANADA.COM
https://hpbc.ca/

rubber hub prop
https://hpbc.ca/viewtopic.php?f=2&t=3785		 Page 1 of 1
Author:  sharpeye Mike [ September 19th, 2017, 6:50 pm ]
Post subject:  rubber hub prop
What are my choices when it comes a stainless steel prop for a nitro gear case?
It has to be rubber hub (needs to be shift able on the fly) and has to have a 19" pitch.
I've done a bunch of places this past week with no luck. 17" is the biggest I can find for the
3 3/8" hub.
Author:  fs5 [ September 20th, 2017, 1:47 am ]
Post subject:  Re: rubber hub prop
try turbo props , pretty certain they do a 19p.
try omc to they used to do a staino 19 .
Author:  sharpeye Mike [ September 20th, 2017, 9:08 am ]
Post subject:  Re: rubber hub prop
OK good to know I've did 3 prop shops and a dozen marinas and outboard dealers so far, got 2 more to do next but will inquire about does. Thanks
Author:  sharpeye Mike [ September 20th, 2017, 9:10 am ]
Post subject:  Re: rubber hub prop
Funny thing is I have an 19 in an aluminum and I came across a 21 aluminum but zippo when it comes to a stainless.
Author:  mxz [ September 26th, 2017, 11:13 am ]
Post subject:  Re: rubber hub prop
I have also been searching for a rubber hub prop for the small OMC case but in a 21". No luck at all.
Author:  Rowboat [ September 26th, 2017, 11:59 am ]
Post subject:  Re: rubber hub prop
Check with John at Kawartha Prop. I had a prop there on consignment that he was working on.
He has two of my 19P SS props.
Author:  sharpeye Mike [ September 26th, 2017, 6:32 pm ]
Post subject:  Re: rubber hub prop
Well I picked up a new older 19 pitch OMC SST 2 prop at Tougas Marine in Saint Remi Quebec yesterday, they also had a used one in 21" for $200. The stainless prop didn't help the cavitation problem I have. Not sure I want to bang on it to put more cup unless I was reassure that it would help a great deal. (hint, hint)
Page 1 of 1 All times are UTC - 5 hours [ DST ]
© 2000, 2002, 2005, 2007 phpBB Group • http://www.phpbb.com