| HPBCANADA.COM https://hpbc.ca/ |
|
| Ron Hill semi-cleaver on a Voodoo? https://hpbc.ca/viewtopic.php?f=2&t=3607 |
Page 1 of 2 |
| Author: | mxz [ January 11th, 2017, 7:38 pm ] |
| Post subject: | Ron Hill semi-cleaver on a Voodoo? |
Anyone try a Ron Hill Semi Cleaver ( Calls it a Mitch Hardy) on a Voodoo or similar boat? How did it run. He has a couple on EBAY in a 12x20" 13 spline size for sale. My son's Voodoo with 50hp Evinrude is only used for lake running, not racing. Any other idea's for a prop? Definitely having trouble finding a used prop. Thanks |
|
| Author: | DoktorC [ January 11th, 2017, 8:58 pm ] |
| Post subject: | Re: Ron Hill semi-cleaver on a Voodoo? |
I had one...worked fine but she was slow compared to the merchant cleaver. |
|
| Author: | mxz [ January 11th, 2017, 9:32 pm ] |
| Post subject: | Re: Ron Hill semi-cleaver on a Voodoo? |
What is a merchant cleaver? Just looking for a good all around prop not a top end one... |
|
| Author: | DoktorC [ January 11th, 2017, 9:36 pm ] |
| Post subject: | Re: Ron Hill semi-cleaver on a Voodoo? |
Merc!!! My phone autocorrects to merchant... |
|
| Author: | Tomcat [ January 11th, 2017, 9:58 pm ] |
| Post subject: | Re: Ron Hill semi-cleaver on a Voodoo? |
Merc Cleaver is a great all round prop. Bit heavy on torque steer but the way it bites makes it worthwhile. |
|
| Author: | mxz [ January 12th, 2017, 8:01 pm ] |
| Post subject: | Re: Ron Hill semi-cleaver on a Voodoo? |
Is a Merc cleaver over hub or through hub? If through hub would it fit a small gearcase OMC? Are the Merc cleavers easier to find? DoktorC, how was the Ron Hill semi cleaver for taking off and just cruising around? Thanks for the info guys! |
|
| Author: | DoktorC [ January 12th, 2017, 8:15 pm ] |
| Post subject: | Re: Ron Hill semi-cleaver on a Voodoo? |
The merc is a thru hub but they're usually very expensive. Its easier to find an inexpensive OMC cleaver which likely works better on your OMC anyways. I used mine to get from our ramp to the dock..I never really cruised in the boat lol. Hole shot was fine though. |
|
| Author: | David [ January 14th, 2017, 8:21 am ] |
| Post subject: | Re: Ron Hill semi-cleaver on a Voodoo? |
For what it's worth, a Merc cleaver sucked on the VooDoo I had. 70 Nissan, long time ago. Very slow to plane and 10 mph slower than an SRX. My boat ran 57.6 on the rev limiter. |
|
| Author: | DoktorC [ January 17th, 2017, 1:09 pm ] |
| Post subject: | Re: Ron Hill semi-cleaver on a Voodoo? |
There is a huge amount of difference between good and bad props on these boats. I think an OMC cleaver is probably easiest to find used and obviously the Ron hill is easiest to afford new. I would have given my left nut for any of those props when I was 14 and was stuck with a stock suzuki stainless with no cupping lol. |
|
| Author: | mxz [ January 18th, 2017, 8:25 pm ] |
| Post subject: | Re: Ron Hill semi-cleaver on a Voodoo? |
Thanks for all the good info guys. I will keep an eye out for a used OMC cleaver over the next few months, if I can't find one by the summer then a Ron Hill it will be. |
|
| Page 1 of 2 | All times are UTC - 5 hours [ DST ] |
| © 2000, 2002, 2005, 2007 phpBB Group • http://www.phpbb.com | |