I finally got some decent pics of it running with Andy driving it. He fits.. The pad / step combo seem to be working nicely.
| HPBCANADA.COM https://hpbc.ca/ |
|
| Prototype Mini GT "Kids" Tunnel Hull (KARR) https://hpbc.ca/viewtopic.php?f=2&t=3477 |
Page 1 of 1 |
| Author: | vwfreak [ August 19th, 2016, 1:28 am ] |
| Post subject: | Prototype Mini GT "Kids" Tunnel Hull (KARR) |
Hi! Nope! Not dead, just been away from these forums for a while. To keep sane, I've been playing with some tweaking of the original Catch 10 I had about 15 years ago. This one's been scaled down by 20% and shortened another few inches to 7'4" long. Cockpit was shifted back and I added a third sponson. Borrowed from the Mirage, it has a step and a pad now, jack plate, setback, etc too. First trial run was a drop on and hope for the best at the Port Carling Antique Boat Show last weekend. My test pilot / monkey chickened out last min, so I shoehorned myself in. at least he brought his GoPro. Again no prior runs, just all guesswork and it hauls for only a stock 9.9 with a slightly dinged prop. *watch the clip at 0:53 it sits on the pad!* A true 8ft tunnel version with some changes again from the stock plans should be ready by Labour Day. It's getting a stripped down Merc 20. Over the winter I will build one at 11ft to run with either my 40hp two cyl Yama-mariner or 40 Magnum 4cyl. I think this hull could be a consideration for expanding classes, if that's an option down the road and I haven't just built a kite.. https://www.youtube.com/watch?v=FF29omRhPZo |
|
| Author: | idvette [ August 19th, 2016, 7:09 am ] |
| Post subject: | Re: Prototype Mini GT "Kids" Tunnel Hull (KARR) |
That's a cool little boat! Well done! |
|
| Author: | DoktorC [ August 19th, 2016, 5:49 pm ] |
| Post subject: | Re: Prototype Mini GT "Kids" Tunnel Hull (KARR) |
This is very cool...I bet this would be something with an A motor or Yamato.. Love the black too... |
|
| Author: | Nervedamage [ August 19th, 2016, 10:42 pm ] |
| Post subject: | Re: Prototype Mini GT "Kids" Tunnel Hull (KARR) |
Very cool |
|
| Author: | dubber [ August 20th, 2016, 9:05 am ] |
| Post subject: | Re: Prototype Mini GT "Kids" Tunnel Hull (KARR) |
It is always cool when it comes together. Good stuff! |
|
| Author: | vwfreak [ September 13th, 2016, 11:54 pm ] |
| Post subject: | Re: Prototype Mini GT "Kids" Tunnel Hull (KARR) |
I finally got some decent pics of it running with Andy driving it. He fits.. The pad / step combo seem to be working nicely.
|
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| © 2000, 2002, 2005, 2007 phpBB Group • http://www.phpbb.com | |