It is currently November 21st, 2024, 5:00 pm

What do you know about aluminium 12 to 14 fishing hulls?

View active topics

All times are UTC - 5 hours [ DST ]


Post new topic Reply to topic  [ 35 posts ]  Go to page 1, 2, 3, 4  Next
Author Message
 PostPosted: May 12th, 2016, 9:53 am   
Team Member
User avatar

Joined: April 3rd, 2012, 1:52 pm
Posts: 3162
I spend an hour on the phone speaking to Norm about aluminium fishing boats. Norm had been a boat salesman for 30 years. A fast education!
Here is what I learned:
There are many manufacturers.
There is a wide difference it quality.
Many boats have different manufacturers name on the same hull, but the hull is built by a third company.
Many hulls were built in Quebec.
The poorly made hulls cannot be repaired.
Some of the very old hulls are better built but heavier,
Some hulls have a single knee on the transom. Others could have 3 and are very strong.
There are both flat and semi V bottoms
A good 12 foot will weigh approximately 200 lbs.
The wide hulls will drive better with the over size motor.
The boats get super light in the nose running over 30 mph with a single person in the boat.
Side winds move the nose all over the place.
We may need a larger hull. A 14 can be faster than a 12 with the same oversize motor.
There are two different seat layouts. Three rows of seats or two rows of seats and a pair of side rear seats.
He did not think there was a 12 footer with rear side seats.
Prince Craft and Starcraft do make a wide, deep. strong boat. He doesn't think it would run 45 mph with a 30 hp.
Drivers would not feel safe with a tiller 30 hp on a narrow, shallow, 12 footer.
Feather craft and Crestliner made 12 foot centre deck runabouts in the 60's. They would be ideal, but far to costly and not many around especially in Canada.
Stay away from any of the light car top models.


Top
 Profile Send private message  
 PostPosted: May 12th, 2016, 11:15 am   
Member

Joined: April 17th, 2014, 10:25 am
Posts: 411
Location: Hillsdale ON
Just need to do a bulk order on a few of these from Australia. 10', mod 30 motor, getting about 55mph with 2 people.
Image

Image

Image

_________________
18' Hydrostream valero, 245 Bridgeport


Top
 Profile Send private message  
 PostPosted: May 12th, 2016, 11:18 am   
Member

Joined: April 17th, 2014, 10:25 am
Posts: 411
Location: Hillsdale ON
I like this video, get a little bit of a background on it.

http://youtu.be/_5aKcpAhTOk

_________________
18' Hydrostream valero, 245 Bridgeport


Top
 Profile Send private message  
 PostPosted: May 12th, 2016, 11:44 am   
Team Member
User avatar

Joined: April 1st, 2012, 12:29 am
Posts: 1445
Everything I know about tin boats is in Rick Cole's head so I'm a genius! :mrgreen:

_________________
Bullet 20 cc Super Comp
Delta with a slow 56
Jcraft with a ProV 150


Top
 Profile Send private message  
 PostPosted: May 12th, 2016, 11:59 am   
HPBC PRESIDENT
User avatar

Joined: March 31st, 2012, 5:53 pm
Posts: 3548
Location: Lapping lil charger
Find a 14' Crestliner sportsman from say..1998. Beat the hook out of it...welded, strong, handles well.

12's are too small for anything but a 15...

Have you considered a jon boat? Those southern boys seem to like them..

_________________
08 SRV w/3.1 Hydro-tec Phase lll

I've got enough torque to tear a hole....in time...


Top
 Profile Send private message  
 PostPosted: May 12th, 2016, 11:59 am   
HPBC PRESIDENT
User avatar

Joined: March 31st, 2012, 5:53 pm
Posts: 3548
Location: Lapping lil charger
LittleCharger wrote:
Everything I know about tin boats is in Rick Cole's head so I'm a genius! :mrgreen:



Flattery will get you everywhere lol

_________________
08 SRV w/3.1 Hydro-tec Phase lll

I've got enough torque to tear a hole....in time...


Top
 Profile Send private message  
 PostPosted: May 12th, 2016, 12:55 pm   
Member

Joined: April 17th, 2014, 10:25 am
Posts: 411
Location: Hillsdale ON
http://www.redbull.com/au/en/adventure/ ... at-go-90km

_________________
18' Hydrostream valero, 245 Bridgeport


Top
 Profile Send private message  
 PostPosted: May 12th, 2016, 1:08 pm   
Member

Joined: June 5th, 2015, 9:18 pm
Posts: 60
I have a couple old Misty Rivers 12'& 14'WD. Strong, welded where it need to be, take a beating. The 12 is light and is a lot of fun with a 25Merc two stroke , jacked and pitched but mosty 9.9-15. The 14 is rated to 35.


Top
 Profile Send private message  
 PostPosted: May 12th, 2016, 1:14 pm   
Member

Joined: June 24th, 2014, 6:58 am
Posts: 116
Location: Corunna ontario
I know a 30 mariner on a 12' flat bottom is a hand full even with a steering wheel/ contols. With a properly placed sand bag it was a hoot till one guy flipped it. still got the motor and would like to find a 14' semi v and try that. Probly still be quick


Top
 Profile Send private message  
 PostPosted: May 12th, 2016, 1:19 pm   
Member

Joined: September 24th, 2012, 7:46 pm
Posts: 355
Location: Lake simcoe
Our 14 foot starcraft with a 25 hp 2 cylinder yamaha runs 30-35 mph on gps with the motor up a tilt pin setting. Ive wanted to put the 25 yamaha on our old 12 foot starcraft to see what it would do. The 14 footer is prone to getting grabbed by gusts of wind with how deep the front of the boat is with only one 5 gallon can up front. A second can solves that problem for the most part.


Top
 Profile Send private message  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 35 posts ]  Go to page 1, 2, 3, 4  Next

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 28 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  


Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Style originally created by Volize © 2003 • Redesigned SkyLine by MartectX © 2008 - 2010