| HPBCANADA.COM https://hpbc.ca/ |
|
| voodoo https://hpbc.ca/viewtopic.php?f=2&t=1063 |
Page 1 of 3 |
| Author: | johnny rotten [ March 26th, 2013, 12:29 pm ] |
| Post subject: | voodoo |
Hi there! I'm new to this site and am hoping to get some advice for a voodoo that I purchased in the fall for my son. It has an 1972 50hp johnson electric on it now but I purchased a 1991 40hp evinrude with power trim for it and will be installing it this spring. Any advice on mounting hight and what size of propeller to use would be much appreciated. The motor did not come with a prop and the prop from the 50hp wont fit. Thanks. 
|
|
| Author: | DoktorC [ March 26th, 2013, 12:56 pm ] |
| Post subject: | Re: voodoo |
How old is your son? |
|
| Author: | johnny rotten [ March 26th, 2013, 1:29 pm ] |
| Post subject: | Re: voodoo |
He is 15 and wont turn 16 until december of this year. We are on Six Mile. |
|
| Author: | Hevi Kevi [ March 26th, 2013, 2:02 pm ] |
| Post subject: | Re: voodoo |
This Voodoo sounds very familiar... |
|
| Author: | DoktorC [ March 26th, 2013, 2:03 pm ] |
| Post subject: | Re: voodoo |
Cool...GREAT boat to learn how to drive in. To start I would think you're going to want the motor up 2-3 holes on the transom...for propping I'm not good with the OMC stuff...but a small thru-hub stainless with some cupping will get him started... |
|
| Author: | johnny rotten [ March 26th, 2013, 2:13 pm ] |
| Post subject: | Re: voodoo |
Yes it does. This is the boat you sold me in the fall Kevin. 
|
|
| Author: | johnny rotten [ March 26th, 2013, 2:18 pm ] |
| Post subject: | Re: voodoo |
DoktorC, thanks for the reply. Any idea on what pitch and size of prop to use. We're looking forward to getting this up and running on the lake. |
|
| Author: | WalkWithMax [ March 27th, 2013, 9:10 am ] |
| Post subject: | Re: voodoo |
johnny rotten wrote: DoctorC, thanks for the reply. Any idea on what pitch and size of prop to use. We're looking forward to getting this up and running on the lake. Your 40 will have the small 3.5" diameter nitro lower unit. I imagine you could find a stock aluminum or stainless through hub prop up to 19" of pitch. Maybe you could take it in and get it repitched and cupped? You really need about 21-23" of pitch to see the boat perform at its full potential. An over hub stainless 23" OMC cleaver would be ideal, but they are expensive and hard to find!!  Dave |
|
| Author: | DoktorC [ March 27th, 2013, 9:48 am ] |
| Post subject: | Re: voodoo |
What gear ratio are those things?? That seems like a lot of prop for a 40hp |
|
| Author: | Isabella_Steamroller [ March 27th, 2013, 11:02 am ] |
| Post subject: | Re: voodoo |
DoktorC wrote: What gear ratio are those things?? That seems like a lot of prop for a 40hp Agreed... Considering my 60 merc only spun i believe a 16 chopper. Maybe it was an 18 but i dont think so.... On a voodoo. And it ran tits imo |
|
| Page 1 of 3 | All times are UTC - 5 hours [ DST ] |
| © 2000, 2002, 2005, 2007 phpBB Group • http://www.phpbb.com | |