It is currently November 21st, 2024, 10:14 pm

Thanks Glenn Burney (Rick)

View active topics

All times are UTC - 5 hours [ DST ]


Post new topic Reply to topic  [ 15 posts ]  Go to page Previous  1, 2
Author Message
 PostPosted: February 3rd, 2013, 5:40 pm   
Team Member
User avatar

Joined: April 2nd, 2012, 7:35 pm
Posts: 406
Location: Barrie, On
wildcatt wrote:
[Has anybody ever painted over a galvanized trailer? I love the durability of them, but they look kinda bla, compared to the painted ones.


Tom, if your galvanized trailer is a couple years old so that the finish is "weathered" there is a couple ways to paint the trailer. It is difficult to paint a brand new galvanized finish to make it adhere properly as Doc mentioned.
If you want to "professionally" powder coat or wet paint the trailer - the best option is to have the trailer sandblasted with a fine sand just enough to roughen up the surface. The paint shops will have a chemical pretreatment wash that will treat the metal before it is painted. The advantage of air dry primer and wet paint is that you will not have to remove all your axles and wiring before painting. If you go with powder coat you have to remove everything because the powder coat curing oven reaches 400 degrees F. for 15 - 20 minutes for a proper cure. The trailer has to hang on a dolly or conveyor to enter and exit the oven.
To paint yourself - just have the trailer sandblasted (or palm sander) first and then brush or roll on a good oil based rust paint right away. Don't wait too long after sandblasting or it will start to oxidize and the paint will not ahdere 100%. Most of the Home Hardwares still carry exterior rust type paints that are oil based ( like the old Tremaclad ) that you can have mixed in any colour. The new Tremclad paints are water based and are not as durable as the old stuff.

_________________
Triad V21 - 300xs
19' J-craft - 175 opti
18' Pontoon - 115 opti
12' tinny - 9.9 merc


Top
 Profile Send private message  
 PostPosted: February 3rd, 2013, 6:07 pm   
HPBC PRESIDENT
User avatar

Joined: March 31st, 2012, 5:53 pm
Posts: 3548
Location: Lapping lil charger
That's good info Doug! I always thought it was the galv. itself that was the issue (like painting chrome)..

_________________
08 SRV w/3.1 Hydro-tec Phase lll

I've got enough torque to tear a hole....in time...


Top
 Profile Send private message  
 PostPosted: February 3rd, 2013, 6:41 pm   
Team Member
User avatar

Joined: April 2nd, 2012, 7:35 pm
Posts: 406
Location: Barrie, On
DoktorC wrote:
That's good info Doug! I always thought it was the galv. itself that was the issue (like painting chrome)..


The Galvanizing industry ( and Chrome) has had to remove the "final" stage of their process because of caustic health issues involved.
That "final" step coating was what gave galvanizing and Chrome finishes the long durability shine that we were used too. Since they don't have that good sealer finish anymore it is not as difficult to paint like it used to be. You don't see many newer pickup truck chrome bumpers that have that deep shine and will last 15 or 20 years like they used to.

_________________
Triad V21 - 300xs
19' J-craft - 175 opti
18' Pontoon - 115 opti
12' tinny - 9.9 merc


Top
 Profile Send private message  
 PostPosted: February 3rd, 2013, 6:53 pm   
HPBC PRESIDENT
User avatar

Joined: March 31st, 2012, 5:53 pm
Posts: 3548
Location: Lapping lil charger
Dougw wrote:
You don't see many newer pickup truck chrome bumpers that have that deep shine and will last 15 or 20 years like they used to.


and they rust quick too...interesting. Again, good info..

_________________
08 SRV w/3.1 Hydro-tec Phase lll

I've got enough torque to tear a hole....in time...


Top
 Profile Send private message  
 PostPosted: February 3rd, 2013, 7:00 pm   
Team Member
User avatar

Joined: April 29th, 2012, 7:26 pm
Posts: 503
Dougw wrote:
wildcatt wrote:
[Has anybody ever painted over a galvanized trailer? I love the durability of them, but they look kinda bla, compared to the painted ones.


Tom, if your galvanized trailer is a couple years old so that the finish is "weathered" there is a couple ways to paint the trailer. It is difficult to paint a brand new galvanized finish to make it adhere properly as Doc mentioned.
If you want to "professionally" powder coat or wet paint the trailer - the best option is to have the trailer sandblasted with a fine sand just enough to roughen up the surface. The paint shops will have a chemical pretreatment wash that will treat the metal before it is painted. The advantage of air dry primer and wet paint is that you will not have to remove all your axles and wiring before painting. If you go with powder coat you have to remove everything because the powder coat curing oven reaches 400 degrees F. for 15 - 20 minutes for a proper cure. The trailer has to hang on a dolly or conveyor to enter and exit the oven.
To paint yourself - just have the trailer sandblasted (or palm sander) first and then brush or roll on a good oil based rust paint right away. Don't wait too long after sandblasting or it will start to oxidize and the paint will not ahdere 100%. Most of the Home Hardwares still carry exterior rust type paints that are oil based ( like the old Tremaclad ) that you can have mixed in any colour. The new Tremclad paints are water based and are not as durable as the old stuff.


Thx Doug - very interesting. I've got a lot on the list right now to get ready for spring. But once the essential stuff is done. I might take a look at the situation.
Good to know it can be done.

_________________
Image
Triad V21 - 225 Johnny HO


Top
 Profile Send private message  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 15 posts ]  Go to page Previous  1, 2

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 26 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  


Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Style originally created by Volize © 2003 • Redesigned SkyLine by MartectX © 2008 - 2010