It is currently November 22nd, 2024, 4:54 am

Any interest in Boat stand/dollies

View active topics

All times are UTC - 5 hours [ DST ]


Post new topic Reply to topic  [ 3 posts ] 
Author Message
 PostPosted: January 21st, 2015, 10:04 pm   
Member
User avatar

Joined: January 22nd, 2013, 11:04 am
Posts: 134
Location: Tottenham Ontario
Long time no see everyone. Been following the forum most days, just don't post much!
I am getting a pair of these stands built for me from a machinist friend of mine who doesn't have to much work this winter and wanted to know is there is any interest in other people wanting a pair of these.
These stands are about the same as the ones I used at Pride Marina when I was a tech there, they work awesome.
The stands I can price together for probably around 800 dollars for a match set and each stand can support 4400 Lbs.
painted back with all hardware on casters.
I will have a better price once my set is finished, likely be about 60-120 dollars less.
price breakdown: casters= $230 bucks, Steel= $200, hardware and wood =$20, Time is 4-6 hours @ $60 per hour for his shop. so roughly 800 bucks i'm guessing.

Specs of the stands:
Black paint,
Steel 4 inch casters
3 "OD .188 wall Steel
Adjustable from a bunk height of 14 inches to 30inches
Support up to a 8000lbs of boat. ( about 28 foot single engine )
Bunks are high enough for a deep-V to completely lower a Bravo 3 drive. or low enough that you can slide on a Alpha drive with ease.

Image
Image
Image

_________________
wana-be boat builder.


Top
 Profile Send private message WWW  
 PostPosted: January 22nd, 2015, 6:56 pm   
Team Member

Joined: April 4th, 2012, 10:08 am
Posts: 626
Really cool.

Can I suggest you use Urethane coated wheels.
They roll over the "floor debris" rather than locking up like the steel ones.
Minimal extra cost.
Good luck with the sales!!!

_________________
Specializing in custom marine performance product fabrication


Top
 Profile Send private message  
 PostPosted: February 6th, 2015, 10:23 pm   
Member
User avatar

Joined: January 22nd, 2013, 11:04 am
Posts: 134
Location: Tottenham Ontario
hey guys, I picked up the stands today got a new projects starting soon I hope.
I found casters for $15 a piece that will support 1500 lbs per stand, so 3000 Lbs total, which should be good for most outboard boats.
casters= $120 bucks, Steel= $200, hardware and wood =$40, Time is 3.5 hours hours @ $60 per hour.
total for the pair is $570.00
( no wood/carpet on these yet)
Image
Image
Image

_________________
wana-be boat builder.


Top
 Profile Send private message WWW  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 63 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  


Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Style originally created by Volize © 2003 • Redesigned SkyLine by MartectX © 2008 - 2010