| HPBCANADA.COM https://hpbc.ca/ |
|
| How to verify Tach? https://hpbc.ca/viewtopic.php?f=19&t=556 |
Page 1 of 1 |
| Author: | p man [ September 16th, 2012, 12:45 pm ] |
| Post subject: | How to verify Tach? |
I'd like to set something up to verify what my Livosi is telling me. I've never played around with an external Tach system before. Are there any tach systems that will work off of a plug wire and read into the 8500rpm range? |
|
| Author: | DoktorC [ September 16th, 2012, 1:00 pm ] |
| Post subject: | Re: How to verify Tach? |
p man wrote: I'd like to set something up to verify what my Livosi is telling me. I've never played around with an external Tach system before. Are there any tach systems that will work off of a plug wire and read into the 8500rpm range? I used to use a Tiny Tach..they work well...clips to a plug wire and will turn 8k+. Digitrons work great too but they are significantly more expensive. FWIW My Autometer is out 2-300 rpm versus the digitron in my boat. |
|
| Author: | LittleCharger [ September 16th, 2012, 1:04 pm ] |
| Post subject: | Re: How to verify Tach? |
p man wrote: I'd like to set something up to verify what my Livosi is telling me. I've never played around with an external Tach system before. Are there any tach systems that will work off of a plug wire and read into the 8500rpm range? Yes, a tiny tack will read above that range. I have a spare one I picked up for the other Tboat, I can bring to Dok's if you like to give it a test...sure want to make sure setup to be good  Cheers, |
|
| Author: | p man [ September 16th, 2012, 2:06 pm ] |
| Post subject: | Re: How to verify Tach? |
LittleCharger wrote: p man wrote: I'd like to set something up to verify what my Livosi is telling me. I've never played around with an external Tach system before. Are there any tach systems that will work off of a plug wire and read into the 8500rpm range? Yes, a tiny tack will read above that range. I have a spare one I picked up for the other Tboat, I can bring to Dok's if you like to give it a test...sure want to make sure setup to be good Cheers, I'll trade ya 6 of your favourite beers if I could give that tiny tach a whirl just for one pass 
|
|
| Author: | LittleCharger [ September 16th, 2012, 2:12 pm ] |
| Post subject: | Re: How to verify Tach? |
p man wrote: LittleCharger wrote: p man wrote: I'd like to set something up to verify what my Livosi is telling me. I've never played around with an external Tach system before. Are there any tach systems that will work off of a plug wire and read into the 8500rpm range? Yes, a tiny tack will read above that range. I have a spare one I picked up for the other Tboat, I can bring to Dok's if you like to give it a test...sure want to make sure setup to be good Cheers, I'll trade ya 6 of your favourite beers if I could give that tiny tach a whirl just for one pass Ok, it's in the car. |
|
| Author: | p man [ September 16th, 2012, 2:16 pm ] |
| Post subject: | Re: How to verify Tach? |
and the beer of choice is? |
|
| Author: | LittleCharger [ September 16th, 2012, 2:57 pm ] |
| Post subject: | Re: How to verify Tach? |
p man wrote: and the beer of choice is? No worries I owe you and it's not that big of a deal it was already in the car!  The wire on it is short, do you want it up front to compare to the other tack while running or only want max rpm read. I have wire to extend it..hell I'll put the wire in the car and you can do what ever you want. Cheers, |
|
| Author: | OneCycle [ September 16th, 2012, 3:34 pm ] |
| Post subject: | Re: How to verify Tach? |
Todd has an awesome digital with a bunch of other shit on it .... its very cool maybe if he sees this thread he will post somthing about it... |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| © 2000, 2002, 2005, 2007 phpBB Group • http://www.phpbb.com | |