Wait . . . what??? There are other boating forums??
The new 200xs will be sweet on that J.
| HPBCANADA.COM https://hpbc.ca/ |
|
| Promax no start https://hpbc.ca/viewtopic.php?f=19&t=3984 |
Page 1 of 2 |
| Author: | David [ June 25th, 2018, 8:05 pm ] |
| Post subject: | Promax no start |
It won't start and there is no smell of gas when I pull plugs. The plugs have spark. Fuel pressure is 40 psi dropping to 36 when the fuel pump switches off. Fuel gets at least that far. We tried swapping out the ECU - no change. Any suggestions? |
|
| Author: | DoktorC [ June 25th, 2018, 10:13 pm ] |
| Post subject: | Re: Promax no start |
Are the plugs wet? |
|
| Author: | David [ June 26th, 2018, 3:01 pm ] |
| Post subject: | Re: Promax no start |
Plugs are dry |
|
| Author: | dubber [ July 5th, 2018, 9:52 pm ] |
| Post subject: | Re: Promax no start |
This thread died. Let's get David back on the water! Everything all cleaned up on the inside for the injectors? |
|
| Author: | idvette [ July 6th, 2018, 7:09 am ] |
| Post subject: | Re: Promax no start |
dubber wrote: This thread died. Let's get David back on the water! Everything all cleaned up on the inside for the injectors? This thread is also on 2 other websites where plenty of help has been offered and not yet followed through due to time/distance constraints. Motor in question is for sale, deposit paid on spankin new 200xs |
|
| Author: | DoktorC [ July 6th, 2018, 7:20 am ] |
| Post subject: | Re: Promax no start |
Wait . . . what??? There are other boating forums?? The new 200xs will be sweet on that J. |
|
| Author: | idvette [ July 6th, 2018, 8:08 am ] |
| Post subject: | Re: Promax no start |
DoktorC wrote: Wait . . . what??? There are other boating forums?? The new 200xs will be sweet on that J. J or Alli? |
|
| Author: | DoktorC [ July 6th, 2018, 8:41 am ] |
| Post subject: | Re: Promax no start |
idvette wrote: DoktorC wrote: Wait . . . what??? There are other boating forums?? The new 200xs will be sweet on that J. J or Alli? Ya...i meant Alliston..sorry I'm a little slow. It's usually etec's that fail not promaxs |
|
| Author: | David [ July 6th, 2018, 1:57 pm ] |
| Post subject: | Re: Promax no start |
I followed up on everything I could while on vacation. Vacation ended with the motor still dead so I took it to a local shop, where of course it started instantly. But not every time. Intermittent failures are a pain. Yes I have a deposit on a 200XS. I've been kicking tires on that engine since the Gen 1 came out. Now or never to get a new one in a crate so I took the plunge. It's just retirement money, so it wasn't being used. New 200XS on SS2000. New 150HO on one year old J Craft. I have doubled down on 2 strokes at what may be the end of the line. I had the short lived bad idea of selling the Promax as is, ie not running, but I will get it fixed before I sell it. |
|
| Author: | David [ July 8th, 2018, 8:51 pm ] |
| Post subject: | Re: Promax no start |
The stator and switch box were replaced and it runs like a champ. |
|
| Page 1 of 2 | All times are UTC - 5 hours [ DST ] |
| © 2000, 2002, 2005, 2007 phpBB Group • http://www.phpbb.com | |