| HPBCANADA.COM https://hpbc.ca/ |
|
| Mechanical trim indicator https://hpbc.ca/viewtopic.php?f=19&t=3076 |
Page 1 of 1 |
| Author: | Wideopen [ September 16th, 2015, 8:50 pm ] |
| Post subject: | Mechanical trim indicator |
Im wondering if anyone on the boards can make or does make a mechanical trim indicator system for a 20'' mercury mid? Ive seen them around for 15" from different places on the web but never 20. Or any ideas on making one? |
|
| Author: | BoomerMuskoka [ September 16th, 2015, 9:26 pm ] |
| Post subject: | Re: Mechanical trim indicator |
HeviKevi? |
|
| Author: | Jeff Yammer [ September 16th, 2015, 9:30 pm ] |
| Post subject: | Re: Mechanical trim indicator |
There's a few brackets for the 20" mid and slides made by a few as well. As Boomer said though , support your local guy and just buy the 20" bracket used on S&F etc |
|
| Author: | Hevi Kevi [ September 16th, 2015, 9:51 pm ] |
| Post subject: | Re: Mechanical trim indicator |
Wideopen, are you Kevin? I think I owe you an indicator from last season. |
|
| Author: | Wideopen [ September 16th, 2015, 10:28 pm ] |
| Post subject: | Re: Mechanical trim indicator |
hevi kevi yes I am Kevin. what else would I need? cable and bracket/ arm? Ill keep an eye for the 20" but they seem rare compared to 15" stuff. How hard would it be to make? |
|
| Author: | Jeff Yammer [ September 17th, 2015, 6:31 pm ] |
| Post subject: | Re: Mechanical trim indicator |
Check out the Livorsi one |
|
| Author: | Wideopen [ September 17th, 2015, 6:40 pm ] |
| Post subject: | Re: Mechanical trim indicator |
Jeff Yammer wrote: Check out the Livorsi one Retails for over 600usd for just the actuator... little much for me. Looking back is cheap lol MOTOboat pmd me and says he has a stainless marine setup. Just waiting to hear what he wants for it. And a nice red billet indicator from hevi kevi would finish it off. |
|
| Author: | Northbase [ September 17th, 2015, 8:06 pm ] |
| Post subject: | Re: Mechanical trim indicator |
I've got a stainless marine actuator. It works on both 15" & 20" HP / OS mids. Kevi, if you want to take measurements off mine youre more then welcome to. I've also got an HP bass mid you could use to make a prototype if you want. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| © 2000, 2002, 2005, 2007 phpBB Group • http://www.phpbb.com | |