HPBCANADA.COM
https://hpbc.ca/

Crank case stuffing
https://hpbc.ca/viewtopic.php?f=19&t=2195		 Page 1 of 3
Author:  J.Kimmerly [ May 15th, 2014, 11:43 pm ]
Post subject:  Crank case stuffing
What type of epoxy is used for this? I have 2.6l apart that has some epoxy used in it but its starting to separate from the metal and id like to re do it.
Author:  Tomcat [ May 16th, 2014, 8:11 am ]
Post subject:  Re: Crank case stuffing
I've used JB Weld on bike parts in past. Holds up very well
Author:  DoktorC [ May 16th, 2014, 8:24 am ]
Post subject:  Re: Crank case stuffing
Tomcat wrote:
I've used JB Weld on bike parts in past. Holds up very well


I've used JB as well on sled motors and some outboard stuff. Seemed to work well for me. I saw on SF guys using PC-7 I think...
Author:  BoomerMuskoka [ May 16th, 2014, 8:40 am ]
Post subject:  Re: Crank case stuffing
DoktorC wrote:
Tomcat wrote:
I've used JB Weld on bike parts in past. Holds up very well


I've used JB as well on sled motors and some outboard stuff. Seemed to work well for me. I saw on SF guys using PC-7 I think...


i tried to get some pc7 last fall and i couldnt find it in Canada. home depot web site says they carry it but try telling that to someone in a store :roll: i tried composites canada they had no idea what i was talking about and noahs...., they suggested "thickened epoxy resin" .. same product recommended to use as core material in my boat :x instead of balsa core and core bond :x " thickened epoxy resin fixes all "......... morons been breathing resin a little too long
Author:  BoomerMuskoka [ May 16th, 2014, 8:51 am ]
Post subject:  Re: Crank case stuffing
try to find pc7 , you will have alot more product to work with for far less money.. vs jb weld.
Author:  hec2buck [ May 16th, 2014, 8:54 am ]
Post subject:  Re: Crank case stuffing
Try either the aluminum or steel Devcon Epoxy.
Author:  DoktorC [ May 16th, 2014, 9:21 am ]
Post subject:  Re: Crank case stuffing
hec2buck wrote:
Try either the aluminum or steel Devcon Epoxy.


I tried to find that stuff back when we were fooling with sleds and couldn't find it up here...but that is what was originally recommended to us. I've seen some stuff used that seems to shrink and pull away from the cases...but I dunno what it is..
Author:  OneCycle [ May 16th, 2014, 9:33 am ]
Post subject:  Re: Crank case stuffing
DoktorC wrote:
hec2buck wrote:
Try either the aluminum or steel Devcon Epoxy.


I tried to find that stuff back when we were fooling with sleds and couldn't find it up here...but that is what was originally recommended to us. I've seen some stuff used that seems to shrink and pull away from the cases...but I dunno what it is..



J.K has my Old Block...FYI
Author:  DoktorC [ May 16th, 2014, 9:49 am ]
Post subject:  Re: Crank case stuffing
OneCycle wrote:
DoktorC wrote:
hec2buck wrote:
Try either the aluminum or steel Devcon Epoxy.


I tried to find that stuff back when we were fooling with sleds and couldn't find it up here...but that is what was originally recommended to us. I've seen some stuff used that seems to shrink and pull away from the cases...but I dunno what it is..



J.K has my Old Block...FYI


From Hoppy?
Author:  OneCycle [ May 16th, 2014, 10:48 am ]
Post subject:  Re: Crank case stuffing
yep
Page 1 of 3 All times are UTC - 5 hours [ DST ]
© 2000, 2002, 2005, 2007 phpBB Group • http://www.phpbb.com