| HPBCANADA.COM https://hpbc.ca/ |
|
| aircraft cable steering https://hpbc.ca/viewtopic.php?f=19&t=1217 |
Page 1 of 1 |
| Author: | BoomerMuskoka [ May 9th, 2013, 11:02 pm ] |
| Post subject: | aircraft cable steering |
i havent seen a topic about this and i know nothing about it.. is race cable steering same as to the old school cable steering from my runabout? or is the helm stronger,? does anyone sell modern cable steering? please explain |
|
| Author: | SHIVERS [ May 10th, 2013, 7:20 am ] |
| Post subject: | Re: aircraft cable steering |
The operation is the same. the difference is with the wing plates added to the motor reducing the torque on the cables and increasing stability to the motor much like dual cable steering does! The helm unit is the same! Proper geometry is critical to keep the cables taught with steering motion and trim input! It's superior to hyd. in my opinion as it's very easily tuned to a drivers preference for ratio! |
|
| Author: | Northbase [ May 10th, 2013, 7:38 am ] |
| Post subject: | Re: aircraft cable steering |
Systems designed for bigger applications like a V6 use 2 bearings on the steering column. Contact Wintech Engine & Machine in Wisconsin, they'll have what ya need if your looking for parts and pcs. |
|
| Author: | KAL Racing [ May 10th, 2013, 7:47 am ] |
| Post subject: | Re: aircraft cable steering |
Northbase wrote: Systems designed for bigger applications like a V6 use 2 bearings on the steering column. Contact Wintech Engine & Machine in Wisconsin, they'll have what ya need if your looking for parts and pcs. Speaking of which, did you get your Red XR stung up yet ? |
|
| Author: | BoomerMuskoka [ May 10th, 2013, 8:01 am ] |
| Post subject: | Re: aircraft cable steering |
KAL Racing wrote: Northbase wrote: Systems designed for bigger applications like a V6 use 2 bearings on the steering column. Contact Wintech Engine & Machine in Wisconsin, they'll have what ya need if your looking for parts and pcs. Speaking of which, did you get your Red XR stung up yet ? im just thinking for my potential t-boat i have 2 helms and plenty of pullys,, i was curious if they would be strong enough, 
|
|
| Author: | p man [ May 10th, 2013, 8:54 am ] |
| Post subject: | Re: aircraft cable steering |
Talk to Fibertron if you're interested. He makes everything you need. |
|
| Author: | wetsidedown [ May 10th, 2013, 1:07 pm ] |
| Post subject: | Re: aircraft cable steering |
USE ONLY QUALITY STUFF. Talk to the Fiberman or someone whom has the same. Like a jacket,what's your life worth? |
|
| Author: | Northbase [ May 10th, 2013, 8:38 pm ] |
| Post subject: | Re: aircraft cable steering |
KAL Racing wrote: Northbase wrote: Systems designed for bigger applications like a V6 use 2 bearings on the steering column. Contact Wintech Engine & Machine in Wisconsin, they'll have what ya need if your looking for parts and pcs. Speaking of which, did you get your Red XR stung up yet ? It's comin. Work is so busy I can't string together more then an hour or two back to back to work on it. It's about to start goin back together. Stripped out all the carpet and cleaned up the goo. Glassed in a new mount for the foot throttle (about 6" farther forward). Sanded out the interior and actually finished painting it about 2 hrs ago. Supposed to be less then perfect this weekend so I may get a few hrs in the shop. Fingers crossed! 
|
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| © 2000, 2002, 2005, 2007 phpBB Group • http://www.phpbb.com | |