Should have stuck with a Yamaha - they have their own built in lift ring
| HPBCANADA.COM https://hpbc.ca/ |
|
| evinrude fitch lifting ring https://hpbc.ca/viewtopic.php?f=19&t=1136 |
Page 1 of 3 |
| Author: | BoomerMuskoka [ April 13th, 2013, 5:57 pm ] |
| Post subject: | evinrude fitch lifting ring |
eh i need a lifting ring for a 2000 fitch 2000, by tomorrow anybody have one between muskoka and markham? |
|
| Author: | Rowboat [ April 14th, 2013, 10:31 am ] |
| Post subject: | Re: evinrude fitch lifting ring |
May not help you today, but what size are they? I do make the Merc lifting rings and would like to add these to the list. |
|
| Author: | dubber [ April 14th, 2013, 11:25 pm ] |
| Post subject: | Re: evinrude fitch lifting ring |
Should have stuck with a Yamaha - they have their own built in lift ring
|
|
| Author: | BoomerMuskoka [ April 14th, 2013, 11:36 pm ] |
| Post subject: | Re: evinrude fitch lifting ring |
dubber wrote: Should have stuck with a Yamaha - they have their own built in lift ring who said i wasn't sticking with yamaha????????  
|
|
| Author: | BoomerMuskoka [ April 14th, 2013, 11:39 pm ] |
| Post subject: | Re: evinrude fitch lifting ring |
Rowboat wrote: May not help you today, but what size are they? I do make the Merc lifting rings and would like to add these to the list. i'm not 100% but i thin its a ring on a plate that bolts to the flywheel over the nut.. ill post some pics of the fly wheel to give you an idea of what i need,,,,, i used man power to lift it,,,, if you notice in another thread,,, the stand next to the motor in my box lol |
|
| Author: | BoomerMuskoka [ April 15th, 2013, 4:29 pm ] |
| Post subject: | Re: evinrude fitch lifting ring |
  flywheel pics |
|
| Author: | wildcatt [ April 15th, 2013, 7:19 pm ] |
| Post subject: | Re: evinrude fitch lifting ring |
Backyard method 3 bolts, 3 pieces of chain and another bolt should do the trick. I Think they are 5/16 fine thread to fit the flywheel Bolt the chain to to each location. Join them together with another bolt. Then hook on with your block and tackle, or what ever your going to lift with |
|
| Author: | dubber [ April 16th, 2013, 12:08 pm ] |
| Post subject: | Re: evinrude fitch lifting ring |
I may be a nervous nelly but those are the bolt holes to pull the flywheel and not lift the motor. I wouldn't want to lift the motor by the flywheel.... I am not familiar with OMCs but isn't there another spot to thread in a monster eye bolt to lift the motor? |
|
| Author: | DoktorC [ April 16th, 2013, 12:37 pm ] |
| Post subject: | Re: evinrude fitch lifting ring |
dubber wrote: I may be a nervous nelly but those are the bolt holes to pull the flywheel and not lift the motor. I wouldn't want to lift the motor by the flywheel.... I am not familiar with OMCs but isn't there another spot to thread in a monster eye bolt to lift the motor? It's strong enough...don't worry. The factory merc lifting ring screws into the flywheel and has for years...even the Verado has one that bolts on and that weighs more than my boat! |
|
| Author: | BoomerMuskoka [ April 16th, 2013, 1:18 pm ] |
| Post subject: | Re: evinrude fitch lifting ring |
the omc lifting ring bolts into those 3 holes,,,so a chain would work,, but a plate with some holes and a ring or chain welded to it would be closer to factory |
|
| Page 1 of 3 | All times are UTC - 5 hours [ DST ] |
| © 2000, 2002, 2005, 2007 phpBB Group • http://www.phpbb.com | |