HPBCANADA.COM
http://hpbc.ca/

Canadian Racers at Jasper !!!!!
http://hpbc.ca/viewtopic.php?f=51&t=1570
Page 4 of 6

Author:  Northbase [ September 10th, 2013, 4:52 pm ]
Post subject:  Re: Canadian Racers at Jasper !!!!!

1BadMirage wrote:
Anyone got the contact information for that place?


Phone 1-423-602-5350
There's a special rate for odba & dsra racers apparently.
We're arriving on Thursday.
Cheers.
:mrgreen:

Author:  KAL Racing [ September 16th, 2013, 9:07 pm ]
Post subject:  Re: Canadian Racers at Jasper !!!!!

Northbase wrote:
Jeff Yammer wrote:
Ted and I will be testing in the next two weeks and getting things dialed in with trim settings , prop selection and the power.


Lets get some testing in and see how things work out.


Are you still headed to Cayuaga next weekend?
If not, come up here.
We can drop the buoys and run with the lights.
I finally got out and tried my stock 22".
What a difference over the worked 20".
More testing tomorrow if the weather clears.
:mrgreen:

Sooo how is the testing going Boys and how did you make out Jeff ?

Author:  Jeff Yammer [ September 16th, 2013, 9:13 pm ]
Post subject:  Re: Canadian Racers at Jasper !!!!!

KAL Racing wrote:
Northbase wrote:
Jeff Yammer wrote:
Ted and I will be testing in the next two weeks and getting things dialed in with trim settings , prop selection and the power.


Lets get some testing in and see how things work out.


Are you still headed to Cayuaga next weekend?
If not, come up here.
We can drop the buoys and run with the lights.
I finally got out and tried my stock 22".
What a difference over the worked 20".
More testing tomorrow if the weather clears.
:mrgreen:

Sooo how is the testing going Boys and how did you make out Jeff ?


Car is going well. 9.81@147 so far. Teds boat is getting beat on this weekend. Race form and tune up.
Then serious Kahshe Lake testing the weekend after. How you doing Ken ? Ashley says hello by the way :)

Author:  Northbase [ September 16th, 2013, 9:58 pm ]
Post subject:  Re: Canadian Racers at Jasper !!!!!

KAL Racing wrote:
Sooo how is the testing going Boys and how did you make out Jeff ?


It's goin!!
I should have my 800' prop back from TBuck in another day or 2 and I've got another one I'm trying out for 1/4 mile running.
I'm gonna pull out the GPS and set markers this weekend.
Time to weigh the boat as well.
.....oh ya, almost forgot......busy as hell with work!!
:mrgreen:

Author:  Jeff Yammer [ September 19th, 2013, 11:07 pm ]
Post subject:  Re: Canadian Racers at Jasper !!!!!

Cell is in , 12/24v trim is done , case work is done , motor is prepped and ready for testing Sunday
Next is an add on skid plane and polish the boat till it removes the last bit of weight needed :roll: :lol:

Author:  KAL Racing [ September 25th, 2013, 8:38 pm ]
Post subject:  Re: Canadian Racers at Jasper !!!!!

Are you guys running both 1/4 mile and 800' classes ? Keep us updated with the testing on Sunday... Was going to maybe show up so Ted can run against some one , he beats me every time but at least he can see his gains.

Author:  Jeff Yammer [ September 25th, 2013, 9:19 pm ]
Post subject:  Re: Canadian Racers at Jasper !!!!!

We will be mostly time testing Ken. . it's always good to see you man

Author:  KAL Racing [ September 30th, 2013, 6:07 pm ]
Post subject:  Re: Canadian Racers at Jasper !!!!!

Sooo did every one get some testing in on the weekend ? Did Jason change his mind about racing ?
Image

Author:  Jeff Yammer [ September 30th, 2013, 6:20 pm ]
Post subject:  Re: Canadian Racers at Jasper !!!!!

We did have a decent test day !!!

The three boats looked great and the times seemed to be competitive from last years timing ( although timed very loosely haha )
Greg has his boat flying better than ever !!!
Archer is damn quick .... QUICK !!!!
Ted got some 24/12V starts under his belt and we have the heads propped now :)

I hope Jason comes as it's confirmed that with a tuner change he can indeed run in Super Stock ( weight to be determined ) , Lake Racer at 1710lbs with a tuner swap to stock ( allowed to modify stock tuner ) & Modified Production 1450lbs with any mods allowed but must use factory components ( SVS allowed ) etc etc

Author:  1BadMirage [ October 4th, 2013, 1:01 am ]
Post subject:  Re: Canadian Racers at Jasper !!!!!

Jeff Yammer wrote:
1BadMirage wrote:
Anyone got the contact information for that place?


Ya ..... google. . . . . Dan are ya new to the interweb. Hahah. Just kidding. Bringing that boat out to play ??


Unfortunately not. Still working on set up and getting the motor to run right. Maybe next year..

Page 4 of 6 All times are UTC - 5 hours [ DST ]
© 2000, 2002, 2005, 2007 phpBB Group • http://www.phpbb.com