Boat looks really good!!! looking forward to seeing how it goes, oh and what diameter are those props?
| HPBCANADA.COM http://hpbc.ca/ |
|
| Rapid Craft Cyclone T-850 and parts http://hpbc.ca/viewtopic.php?f=41&t=3072 |
Page 3 of 3 |
| Author: | Hounddog [ March 2nd, 2016, 11:58 pm ] |
| Post subject: | Re: Rapid Craft Cyclone T-850 and parts |
There will be several OMC racers interested in that 25 pitch prop! |
|
| Author: | Tom Schnull [ March 3rd, 2016, 12:03 am ] |
| Post subject: | Re: Rapid Craft Cyclone T-850 and parts |
Yes, my wife graciously ceded the garage [her car out in the snow] so I could work on it over the winter. Tom |
|
| Author: | tunnelv [ March 3rd, 2016, 10:01 am ] |
| Post subject: | Re: Rapid Craft Cyclone T-850 and parts |
Boat looks really good!!! looking forward to seeing how it goes, oh and what diameter are those props?
|
|
| Author: | Tom Schnull [ March 3rd, 2016, 10:30 pm ] |
| Post subject: | Re: Rapid Craft Cyclone T-850 and parts |
Here are the props Jeff sent along... 12 ½” 23 p [shiny big one, has a small ‘M’ in a box on it, other characters after that not clear, also has 387058 inscribed, looks to be in very good condition] 12 ¼” 23 p [yellow number, ‘Ron Hill’ on it, nothing else, looks VERY well used, maybe that’s a good sign?] 12” 25 p [‘Jeff Brown’ on it, also ‘DAH’ and the number 8024F 025] Tom |
|
| Author: | Hounddog [ March 3rd, 2016, 11:38 pm ] |
| Post subject: | Re: Rapid Craft Cyclone T-850 and parts |
Jeff Brown raced SE in the seventies. I remember him because he ran a Goat Boat similar to the one Jimbo raced here in Toronto. There were not many Goat Boats made. Thom may have raced him back then. The M prop is an OMC, texas cut likely used on a tunnel. A good selection to test |
|
| Author: | harold8 [ March 5th, 2016, 4:27 pm ] |
| Post subject: | Re: Rapid Craft Cyclone T-850 and parts |
Tom, are you selling your stock stuff? |
|
| Author: | Tom Schnull [ March 7th, 2016, 9:50 pm ] |
| Post subject: | Re: Rapid Craft Cyclone T-850 and parts |
No way, Harold. The hydro is good fun. Will just mix it up a bit. I'll aim to do both at Waterford. Tom |
|
| Author: | Tom Schnull [ April 17th, 2016, 9:05 pm ] |
| Post subject: | Re: Rapid Craft Cyclone T-850 and parts |
Well, seems I have 3 OMC props not altered to fit a Merc. Prop shaft isn't long enough to fit them. Live 'n' learn. Am looking for a prop to test for early/mid May when I open cottage, Parry Sound area, for my Merc 60 FormulaRace, now on the RapidCraft I bought from Kevin. Could trade one of the OMC props, or sell one and buy a prop that works on the Merc, depending what's out there. Would have interest in both a race and lake prop. Please see my earlier post, there's a photo of the three props there. Details are: 12 ½” 23 p [shiny big one, has a small ‘M’ in a box on it, other characters after that not clear, also has 387058 inscribed, in very good condition] 12 ¼” 23 p [yellow number, ‘Ron Hill’ on it, nothing else, looks very well used, maybe that’s a good sign?] 12” 25 p [‘Jeff Brown’ on it, also ‘DAH’ and the number 8024F 025] Can call me [cell 416-272-8685] if want to discuss, or email tom.schnull@glencore-ca.com . Tom |
|
| Page 3 of 3 | All times are UTC - 5 hours [ DST ] |
| © 2000, 2002, 2005, 2007 phpBB Group • http://www.phpbb.com | |