HPBCANADA.COM
http://hpbc.ca/

nydahl shifter
http://hpbc.ca/viewtopic.php?f=37&t=966		 Page 1 of 3
Author:  tunnelv [ February 20th, 2013, 5:21 pm ]
Post subject:  nydahl shifter
Does anyone have a used one or something like it ?
thanks
Author:  Supermitchie [ February 23rd, 2013, 12:27 pm ]
Post subject:  Re: nydahl shifter
One thing to keep in mind with a nydahl it that they have no detent. This may or may not be an issue for you. I can tell you that with my shifter I made it was an issue, so I had to make one. I think If I were to buy a shifter I would get a Rex style or an incontrol(not likely because I am cheap.) They are all hard as shit to fine new.
p.s. Not trying to be a no it all.... You probably know more than me... lol.
Author:  Rowboat [ February 23rd, 2013, 2:13 pm ]
Post subject:  Re: nydahl shifter
It probably won't happen soon enough for you, but I am designing/fabricating shifters.
I based them on a simple K & S design, similar to Nydahl, with friction detent, not positive detent.
It worked great in my Seebold.
As soon as I get some made I will be posting.

I am debating between cast and billet right now for fabrication.
It all affects price.
Author:  tunnelv [ February 24th, 2013, 9:26 am ]
Post subject:  Re: nydahl shifter
Mitch, thanks for the input, i wont know if it needs a detent till it pops out lol, i figured i could even use a pin that removes easy to lock it, its for my delta, i have seached for Rex style or In Control but have not came up with finding any pics, as ive thought abut making my own aswell,

Rowboat how soon? any pics of your Seebold shifter?
Author:  Rowboat [ February 24th, 2013, 6:34 pm ]
Post subject:  Re: nydahl shifter
K & S shifter from the Seebold

Image

My design (below) is a little different but the principle is the same.
It just follows the K.I.S.S. method of fabrication!!
This design is a side mounted unit.

Image

AS far as when........as soon as Mrs. Rowboat doesn't want any more renovations done!! ;)
Author:  wildcatt [ February 24th, 2013, 9:56 pm ]
Post subject:  Re: nydahl shifter
I'd be interested in hearing when you've got something as well Brent
Author:  tunnelv [ February 24th, 2013, 10:27 pm ]
Post subject:  Re: nydahl shifter
Rowboat wrote:
K & S shifter from the Seebold

Image

My design (below) is a little different but the principle is the same.
It just follows the K.I.S.S. method of fabrication!!
This design is a side mounted unit.

Image

AS far as when........as soon as Mrs. Rowboat doesn't want any more renovations done!! ;)


that looks cool, i need floor mount,if i dont find one for my cheapo price, i may end up doing crude ,a piece of angle and flatbar with a bolt throught it no bushing and tighten the bolt for tension saw a homeaide sidemount on dillion racing just buying could be easier/quicker :)
Author:  Hounddog [ February 24th, 2013, 10:35 pm ]
Post subject:  Re: nydahl shifter
Not sure if their still selling the parts.
But you can check
http://www.wintechenginemachine.com/cat ... Prices.pdf
Author:  Rowboat [ February 25th, 2013, 9:23 am ]
Post subject:  Re: nydahl shifter
Floor mount bracket would be easy to make for the existing design.
It would just require another piece of angle machined to match the mounting holes.
I am also designing a floor mount as well as a flush mount.

My issue is time right now!!
As soon as I have some made I will post pic.'s.

Wildcatt - maybe you could be my test boat!!
Of course that would mean I have to go along for the ride. :D
Author:  Supermitchie [ February 25th, 2013, 5:07 pm ]
Post subject:  Re: nydahl shifter
That looks alot like mine I made.... But yours will probably be nicer when you get popping them out. I made a threaded hole in the pivot area and an open hole undernead so I can turn a know 2 turns and that basically locks it in gear. It's crude.. But I made it from scrap under my bench and it works.
Page 1 of 3 All times are UTC - 5 hours [ DST ]
© 2000, 2002, 2005, 2007 phpBB Group • http://www.phpbb.com