best number i ran was with a 28p mazco? cleaver 79.2 mph w/ stock water pickups
i have a 28p mach 3 (needs work) and a 24p merc a5 chopper to trade, or sell 
| HPBCANADA.COM http://hpbc.ca/ |
|
| 28p and or 30p cleaver 14.5" http://hpbc.ca/viewtopic.php?f=36&t=1660 |
Page 1 of 1 |
| Author: | BoomerMuskoka [ September 22nd, 2013, 5:58 pm ] |
| Post subject: | 28p and or 30p cleaver 14.5" |
best number i ran was with a 28p mazco? cleaver 79.2 mph w/ stock water pickups i have a 28p mach 3 (needs work) and a 24p merc a5 chopper to trade, or sell
|
|
| Author: | DoktorC [ September 22nd, 2013, 8:25 pm ] |
| Post subject: | Re: 28p and or 30p cleaver 14.5" |
The prop you used was a 15x28 Mazco. |
|
| Author: | BoomerMuskoka [ September 22nd, 2013, 11:16 pm ] |
| Post subject: | Re: 28p and or 30p cleaver 14.5" |
15"  i knew it was a 28p anyway i guess id like to try a 14.5" first, should be easier for the old 2.6 to spin. thanks again dok, 2nd last prop of the day and it was the one,, i ran a 26p small ear back to the ramp its a decent prop with this setup.
|
|
| Author: | BoomerMuskoka [ September 22nd, 2013, 11:27 pm ] |
| Post subject: | Re: 28p and or 30p cleaver 14.5" |
all of my props will run into the seventies with this setup! some handle better, the et makes alot of roost  and feels like it wants to hook at times. im not set up for it.... yet.
|
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| © 2000, 2002, 2005, 2007 phpBB Group • http://www.phpbb.com | |