HPBCANADA.COM
http://hpbc.ca/

Mechanical Trim Indicators
http://hpbc.ca/viewtopic.php?f=28&t=2160		 Page 1 of 3
Author:  Hevi Kevi [ May 1st, 2014, 3:18 pm ]
Post subject:  Mechanical Trim Indicators
I have just finished making a bunch of these trim gauges. They should be back from anodizing tomorrow. Price is $140 and that includes the backing plate with 8-32 tapped holes for mounting. They take a standard 1/4" throttle/shifter cable and have approx 3 1/2" of linear travel. Just happens to be the same travel as the Mercury trim cylinders I just got for my Critch. Let me know if you need the cable to go to the left or right side. I had them anodized in red and blue so those are the colours to choose from for now.

Image

Image

Image
Author:  mistah_max [ May 2nd, 2014, 12:15 am ]
Post subject:  Re: Mechanical Trim Indicators
nice I may need this!

could you make a "how to" for the installation on the engine?
Author:  Hevi Kevi [ May 2nd, 2014, 1:12 pm ]
Post subject:  Re: Mechanical Trim Indicators
For thru hull trim on race boats it's very easy. What I would like to do is find out what the most popular mid is that people are using on their fast lake boats or drag boats and make up something for that. I could do a step by step "how to" for a DIY guy or sell the finished product.
Author:  wildcatt [ May 3rd, 2014, 7:47 am ]
Post subject:  Re: Mechanical Trim Indicators
that's sweet!

A mount for lift would be great to put together as a "kit"

nice work!
Author:  Nervedamage [ January 29th, 2016, 9:31 pm ]
Post subject:  Re: Mechanical Trim Indicators
Hevi Kevi

Do u still have any ?

Thanks Pete
Author:  Hevi Kevi [ January 29th, 2016, 9:45 pm ]
Post subject:  Re: Mechanical Trim Indicators
I have some in red and some in blue ready to go.
Author:  Nervedamage [ January 30th, 2016, 10:30 am ]
Post subject:  Re: Mechanical Trim Indicators
Did you every put any complete kits together or of you still just sell the gauges? Also what is the distance from the back of the flange to where the cable goes in, my dash is probably a inch thick where I would like to put it.

Thanks Pete
Author:  Hevi Kevi [ January 30th, 2016, 8:28 pm ]
Post subject:  Re: Mechanical Trim Indicators
Never got around to making the actuators. Still in the plans for one of these days but things have been very busy here. I'm pretty sure you'll be fine with a 1" thick dash but I will measure a part up when I'm back in the shop tomorrow. They are 1 1/4" I think.

Kevin.
Author:  Nervedamage [ January 31st, 2016, 8:22 pm ]
Post subject:  Re: Mechanical Trim Indicators
Ok keep posted
Author:  Hevi Kevi [ February 1st, 2016, 7:38 am ]
Post subject:  Re: Mechanical Trim Indicators
Yep, 1 1/4". Will fit your dash no problem. I'm going to get some new pictures up soon. I get them laser engraved now and they look even better. It basically makes the anodizing white.
Page 1 of 3 All times are UTC - 5 hours [ DST ]
© 2000, 2002, 2005, 2007 phpBB Group • http://www.phpbb.com