HPBCANADA.COM
http://hpbc.ca/

RC mold and plug building
http://hpbc.ca/viewtopic.php?f=25&t=909		 Page 1 of 1
Author:  STV builder [ January 31st, 2013, 8:56 pm ]
Post subject:  RC mold and plug building
hey guys. While i have been waiting for some fiberglass cloth to start on my seats and fairings i am continuing to work on my plug for a model off shore catamaran.
built off frame, all laser cut, and then framed up and balsa, then gelcoat!
this will be the plug, going to knock it off the board, give it a deck profile and build a mold out of it so i can lay these up.
Image
Image
Image
Image
Image
Image
Image
Image
Author:  LittleCharger [ January 31st, 2013, 9:28 pm ]
Post subject:  Re: RC mold and plug building
Very cool!
Author:  DoktorC [ January 31st, 2013, 10:13 pm ]
Post subject:  Re: RC mold and plug building
Oh maaaaan....I love that stuff. How big?
Author:  dubber [ February 1st, 2013, 12:30 am ]
Post subject:  Re: RC mold and plug building
Awesome!! That looks cool!

Well that about does it. I am resurrecting my old man's homemade RC boat the next time I go home. You will have the balsa made cat and I will have the balsa vee bottom!
Author:  STV builder [ February 1st, 2013, 2:24 pm ]
Post subject:  Re: RC mold and plug building
Thanks Guys!.
the boat is 39 inches long with a deck overhang of 2 inches so a total length of 41 inches.
twin motors, right now i am getting some Greensand and i am going to design a NXT1- or number 6 drysump drive and lay it up, then cast if out of aluminum with greensand.
Author:  STV builder [ February 1st, 2013, 2:35 pm ]
Post subject:  Re: RC mold and plug building
here is one of my other cat boats i built for the GF to play with
Image
Image
Image
Image
Image
Image
Image
Author:  Supermitchie [ February 5th, 2013, 6:00 pm ]
Post subject:  Re: RC mold and plug building
K.C.C.O.
Author:  STV builder [ February 6th, 2013, 11:54 am ]
Post subject:  Re: RC mold and plug building
KCCO!!
No progress has been made on this lately. been busy with my seats and trying to get my infusion process down pat!
and been busy making stickers and doing installs
Page 1 of 1 All times are UTC - 5 hours [ DST ]
© 2000, 2002, 2005, 2007 phpBB Group • http://www.phpbb.com