HPBCANADA.COM
http://hpbc.ca/

Two more T750 boats will be at Gravenhurst 2016
http://hpbc.ca/viewtopic.php?f=24&t=3203
Page 3 of 6

Author:  hec2buck [ January 7th, 2016, 2:21 pm ]
Post subject:  Re: Two more T750 boats will be at Gravenhurst 2016

:?: Don, Is this 60 Yamaha project going on a light Critch? Sounds like a hot little set up!

Author:  hec2buck [ January 7th, 2016, 2:22 pm ]
Post subject:  Re: Two more T750 boats will be at Gravenhurst 2016

;) You are going to force me to retire like you have just done. Need more time to build motors?

Author:  Hounddog [ January 7th, 2016, 2:28 pm ]
Post subject:  Re: Two more T750 boats will be at Gravenhurst 2016

hec2buck wrote:
:?: Don, Is this 60 Yamaha project going on a light Critch? Sounds like a hot little set up!


No the light Critchfield [the red one] is running an OMC.
It will have a different set up with the seat almost half way back in the boat.
Same as the British T boats.

The yamaha will run on Jim's 911 Critchfield.
My goal is not to win but be competitive with a number of different makes of motors.

Years ago when the 60DE motors raced in Japan they raced against the 2 cylinder Tohatsu and the 2 cylinder Suzuki.
The killer motor was the Suzuki.

Author:  sharpeye Mike [ January 7th, 2016, 7:57 pm ]
Post subject:  Re: Two more T750 boats will be at Gravenhurst 2016

There's a 60 hp for sale by my neck of the woods. $700 comes with boat and trailer but I'm pretty sure it's a long shaft.
Check it out on KIJIJI Cornwall.

Author:  Hounddog [ January 7th, 2016, 8:29 pm ]
Post subject:  Re: Two more T750 boats will be at Gravenhurst 2016

Mike, I had a look at it. Yes, it is one of them. It is a long shaft but likely a 19 inch not a 20. It is a very similar power head. Perfect for a older VooDoo with the 24 inch transom. You would not need a jack plate. The motor fits right on the transom. The factory 70 or 90 hp Yamaha power trim also bolts right on. This is like the 55 hp we mounted on the Delta on 6 mile.

Author:  sharpeye Mike [ January 8th, 2016, 9:53 am ]
Post subject:  Re: Two more T750 boats will be at Gravenhurst 2016

The 15" are getting scarce, not sure I need one for myself but I will keep my eyes open for you guys.

Author:  Hounddog [ January 8th, 2016, 11:02 am ]
Post subject:  Re: Two more T750 boats will be at Gravenhurst 2016

The 15 inch is rare. There are two options. One you can cut a long shaft down so it fits the short shaft steering assemble. The result is a 16 inch, DOC did that with his 70 yamaha. It works well. The second solution is to use the cut long mid with the lower section of a 40 or 50 yamaha 4 stroke. That makes a 15 inch. Top Gun made several 15 in 70 yamahas the same way.Only difference here is you use the 55/90 mid for the top section. Both solutions are likely less costly than getting an original.

Author:  Hounddog [ January 22nd, 2016, 12:21 am ]
Post subject:  Re: Two more T750 boats will be at Gravenhurst 2016

Parts for the 2 cylinder Mariner are very hard to locate. The latest challenge is trying to locate the exhaust pipe. Most people think there is one style only. That being the large one piece unit' That is not true. There was one with a separate exhaust and out shell.
THIS ONE:
http://www.crowleymarine.com/mercury-ou ... 704_16.cfm

Here is the common one:
http://www.crowleymarine.com/mercury-ou ... mdl=JIPEHB

If you know of someone who has these parts PLEASE post on the thread.
THANKS

Author:  Hounddog [ January 25th, 2016, 4:16 pm ]
Post subject:  Re: Two more T750 boats will be at Gravenhurst 2016

Here is a parts motor I tried to get.
Sold very quickly
http://www.ebay.co.uk/itm/YAMAHA-60-SHO ... true&rt=nc

Now I am working on this boat and motor

http://www.ebay.co.uk/itm/Bristol-Singl ... SwZG9WlobB

I was able to find some head gaskets

http://www.ebay.co.uk/itm/191791679905

Author:  Hounddog [ January 28th, 2016, 2:31 pm ]
Post subject:  Re: Two more T750 boats will be at Gravenhurst 2016

Great news to-day for T750!!
Seems a new T boat racer who was going to run T850 will be running T750 in 2016.
And he is NOT running an OMC!!!
Nor is it a Toaster!
Nor is it a Yamaha!
Nor is it a Mariner!
Nope not a 49 Mercury!

Page 3 of 6 All times are UTC - 5 hours [ DST ]
© 2000, 2002, 2005, 2007 phpBB Group • http://www.phpbb.com