HPBCANADA.COM
http://hpbc.ca/

6H5...50 hp YAMAHA CYLINDER HEAD....AFTERMARKET VS STOCK
http://hpbc.ca/viewtopic.php?f=20&t=4281
Page 1 of 1

Author:  Hounddog [ February 6th, 2020, 5:20 pm ]
Post subject:  6H5...50 hp YAMAHA CYLINDER HEAD....AFTERMARKET VS STOCK

Anyone run one of these??
http://www.boatracingfacts.com/forums/s ... 70CES+head

Similar to the stock centre plug head with smaller volume
https://www.ebay.ca/itm/Yamaha-50hp-2-s ... aQ&vxp=mtr

Has anyone tried to cut the stock head to achieve 160 lb compression??

Author:  DoktorC [ February 6th, 2020, 8:25 pm ]
Post subject:  Re: 6H5...50 hp YAMAHA CYLINDER HEAD....AFTERMARKET VS STOCK

Hounddog wrote:
Anyone run one of these??
http://www.boatracingfacts.com/forums/s ... 70CES+head

Similar to the stock centre plug head with smaller volume
https://www.ebay.ca/itm/Yamaha-50hp-2-s ... aQ&vxp=mtr

Has anyone tried to cut the stock head to achieve 160 lb compression??


I have a center fire P50 head but it's stock...I'm not sure you could cut it enough without getting into the squish to achieve 160lbs.

Author:  Roflhat [ February 8th, 2020, 5:30 am ]
Post subject:  Re: 6H5...50 hp YAMAHA CYLINDER HEAD....AFTERMARKET VS STOCK

I ran a TSR head on my 70ces, was down on compression compared to my standard head, never got the performance from it. Maybe if you got smaller chambers for it, was at 125psi with TSR, 150psi with CES head

Page 1 of 1 All times are UTC - 5 hours [ DST ]
© 2000, 2002, 2005, 2007 phpBB Group • http://www.phpbb.com