looking good
I am surprised you didn't hang a plastic sheet around your walls and on your floor to protect from the over spray.
| HPBCANADA.COM http://hpbc.ca/ |
|
| Voodoo resurrection http://hpbc.ca/viewtopic.php?f=20&t=4086 |
Page 1 of 9 |
| Author: | MarkStein [ October 31st, 2018, 9:29 am ] |
| Post subject: | Voodoo resurrection |
Thought Id post up progress as my son and i bring this old Voodoo back to life. Thanks for looking! https://www.facebook.com/media/set/?set ... 925&type=3 |
|
| Author: | mattmak [ October 31st, 2018, 9:33 am ] |
| Post subject: | Re: Voodoo resurrection |
Like! Always liked how unique the gel colouring was on that boat. The faded red will sand/polish up well, I think.. Or will you be painting it? |
|
| Author: | MarkStein [ October 31st, 2018, 9:36 am ] |
| Post subject: | Re: Voodoo resurrection |
mattmak wrote: Like! Always liked how unique the gel colouring was on that boat. The faded red will sand/polish up well, I think.. Or will you be painting it? No its too far gone we tried. We are painting the deck, leaving the hull. |
|
| Author: | MarkStein [ November 3rd, 2018, 8:09 am ] |
| Post subject: | Re: Voodoo resurrection |
Sprayed the white on the hull tonight. Im really happy how it turned out for being my first attempt at painting. We used a single stage Omni product and sprayed with an inexpensive devilbis hvlp gun. https://scontent.fymy1-2.fna.fbcdn.net/ ... e=5C7F810D https://www.facebook.com/mark.stein.338 ... 45925/?t=2 https://scontent.fymy1-2.fna.fbcdn.net/ ... e=5C7699F6 https://scontent.fymy1-2.fna.fbcdn.net/ ... e=5C3EDE3E |
|
| Author: | Dougw [ November 3rd, 2018, 8:41 am ] |
| Post subject: | Re: Voodoo resurrection |
looking good I am surprised you didn't hang a plastic sheet around your walls and on your floor to protect from the over spray.
|
|
| Author: | MarkStein [ November 3rd, 2018, 9:31 am ] |
| Post subject: | Re: Voodoo resurrection |
Dougw wrote: looking good I am surprised you didn't hang a plastic sheet around your walls and on your floor to protect from the over spray.I rinsed everything down then had an exhaust fan running. It was pretty good. When I spray the deck I will |
|
| Author: | MarkStein [ November 6th, 2018, 12:25 pm ] |
| Post subject: | Re: Voodoo resurrection |
Spent some time cleaning up some parts last night. Go the set back plate looking near new https://scontent.fymy1-2.fna.fbcdn.net/ ... e=5C70C676 https://www.facebook.com/mark.stein.338 ... 20925/?t=3 https://scontent.fymy1-2.fna.fbcdn.net/ ... e=5C40296B |
|
| Author: | MarkStein [ November 12th, 2018, 9:57 am ] |
| Post subject: | Re: Voodoo resurrection |
Got the high build on the deck on Sat. Few little flaws so we will go at that tonight. Pete dropped off the foot throttle as well. Its all coming together https://www.facebook.com/photo.php?fbid ... =960%2C720 https://www.facebook.com/photo.php?fbid ... =960%2C720 https://www.facebook.com/photo.php?fbid ... 072%2C1440 |
|
| Author: | Hounddog [ November 14th, 2018, 4:09 pm ] |
| Post subject: | Re: Voodoo resurrection |
Mark you and your son will like this video. In this video at 2 minutes is a young fellow running a 60 hp STOCK twin OMC short Shaft on a centre steer VooDoo.....runs approximately 50 mph. Same model motor as Matt has for sale on another thread. https://www.youtube.com/watch?v=31nSIe2OUOo |
|
| Author: | MarkStein [ November 14th, 2018, 5:57 pm ] |
| Post subject: | Re: Voodoo resurrection |
Hounddog wrote: Mark you and your son will like this video. In this video at 2 minutes is a young fellow running a 60 hp STOCK twin OMC short Shaft on a centre steer VooDoo.....runs approximately 50 mph. Same model motor as Matt has for sale on another thread. https://www.youtube.com/watch?v=31nSIe2OUOo Cool ill check it out! Thanks man! |
|
| Page 1 of 9 | All times are UTC - 5 hours [ DST ] |
| © 2000, 2002, 2005, 2007 phpBB Group • http://www.phpbb.com | |
