| HPBCANADA.COM http://hpbc.ca/ |
|
| Gauges http://hpbc.ca/viewtopic.php?f=20&t=3884 |
Page 1 of 1 |
| Author: | kah68 [ January 17th, 2018, 11:29 am ] |
| Post subject: | Gauges |
Looking for suggestions, I'm going from OMC to Merc 300xs. As it stands now I have Livorsi GPS speed, Merc tach, fuel level, water temp, water pressure and OMC System check. I'd like to match the gauges with the Livorsi GPS and maybe add a trim gauge where the system check is. I was also thinking of adding a Merc Monitor. Just wondering if it would be worth adding the merc monitor or not and if there is anything else I'm missing. The boat just had all new wiring so I'd like to leave it as is for the most part and not too keen on cutting anymore holes in the dash. Thanks Kirk |
|
| Author: | talonkid [ January 17th, 2018, 3:39 pm ] |
| Post subject: | Re: Gauges |
Are you leaving the motor 20" stock or are you going to 15"? Only reason why I ask is because I don't believe a standard 2-1/16 gauge will work with, at least it for sure won't work with the 15" motor. You'll have to go with a mechanical style indicator like ones sold at stainless marine or Gaffrig. For gauges to match your Livorsi speedo I'd either go with Livorsi or Autometer. |
|
| Author: | kah68 [ January 17th, 2018, 9:12 pm ] |
| Post subject: | Re: Gauges |
15" good to know. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| © 2000, 2002, 2005, 2007 phpBB Group • http://www.phpbb.com | |